don't go through dnr process when it's not enabled

This reverts commit 3880b56108.

lib_xua/lib_xua/src/dfu/flash_interface.c

@@ -23,7 +23,7 @@
  */
 #ifndef FLASH_MAX_UPGRADE_SIZE
 //#define FLASH_MAX_UPGRADE_SIZE (512 * 1024)
-#define FLASH_MAX_UPGRADE_SIZE (0x1a0000)
+#define FLASH_MAX_UPGRADE_SIZE (2200 * 1024)
 #endif
 
 #define FLASH_ERROR() do {} while(0)

sw_usb_audio/app_usb_aud_phaten_golden_6ch/CMakeLists.txt

@@ -38,7 +38,7 @@ endif()
 # Firmware version (maps to BCD_DEVICE_J.M.N in USB descriptor)
 set(FW_VER_J 1)
 set(FW_VER_M 0)
-set(FW_VER_N 9)
+set(FW_VER_N 10)
 set(FW_VERSION "v${FW_VER_J}.${FW_VER_M}.${FW_VER_N}")
 
 set(SW_USB_AUDIO_FLAGS ${EXTRA_BUILD_FLAGS} -Os
@@ -86,25 +86,23 @@ set(APP_COMPILER_FLAGS_f5_music_uac1 ${SW_USB_AUDIO_FLAGS}       -DI2S_CHANS_DAC
                                                         -DF5_MUSIC_UAC1=1
                                                         #-DUSE_EX3D
                                                         -DMIXER=0
-                                                        #-ldnr_50ms
-                                                        #-DDNR_ENABLE=1
+                                                        -ldnr_50ms
+                                                        -DDNR_ENABLE=1
                                                         #-llib_ex3d_all
                                                         -DEQ_EN=1
                                                         -DEX3D_SF_NUM=3
                                                         -DNUM_USB_CHAN_OUT=8
                                                         -DNUM_USB_CHAN_OUT_FS=2
                                                         -DNUM_USB_CHAN_IN=2
-                                                        -DSTREAM_FORMAT_OUTPUT_1_RESOLUTION_BITS=16
-                                                        -DSTREAM_FORMAT_OUTPUT_2_RESOLUTION_BITS=16
-                                                        -DSTREAM_FORMAT_OUTPUT_3_RESOLUTION_BITS=16
-                                                        -DSTREAM_FORMAT_INPUT_1_RESOLUTION_BITS=16
-                                                        -DSTREAM_FORMAT_INPUT_2_RESOLUTION_BITS=16
-                                                        -DSTREAM_FORMAT_INPUT_3_RESOLUTION_BITS=16
+                                                        -DSTREAM_FORMAT_OUTPUT_1_RESOLUTION_BITS=24
+                                                        -DSTREAM_FORMAT_INPUT_1_RESOLUTION_BITS=24
+                                                        -DINPUT_FORMAT_COUNT=1
+                                                        -DOUTPUT_FORMAT_COUNT=1
                                                         #-DNUM_EX3D_CHAN_OUT=2
                                                         -DMIN_VOLUME=0xE000
                                                         -DINPUT_VOLUME_CONTROL=0
                                                         -DOUTPUT_VOLUME_CONTROL=0
-                                                        -DDEBUG_MEMORY_LOG_ENABLED=1
+                                                        #-DDEBUG_MEMORY_LOG_ENABLED=1
                                                         -DXUA_DFU_EN=0
                                                         -DHID_CONTROLS_UAC1=1
                                                         #-DIR_SWITCHING_MODE
@@ -131,9 +129,10 @@ set(APP_COMPILER_FLAGS_fact ${SW_USB_FACT_FLAGS}       -DI2S_CHANS_DAC=2
                                                         -DINPUT_VOLUME_CONTROL=0
                                                         -DOUTPUT_VOLUME_CONTROL=0
                                                         -DDEBUG_MEMORY_LOG_ENABLED=1
+                                                        -DHID_DFU_EN=1
                                                         -DXUA_DFU_EN=1
                                                         #-DIR_SWITCHING_MODE
-                                                        -DHID_CONTROLS=0)
+                                                        -DHID_CONTROLS=1)
 
 
 
@@ -196,11 +195,14 @@ set(APP_COMPILER_FLAGS_f3_f4_fps_uac2 ${SW_USB_AUDIO_FLAGS}    -DI2S_CHANS_DAC=2
                                                         -DHID_DFU_EN=1
                                                         -DIR_SWITCHING_MODE
                                                         -DHID_CONTROLS=1)
+
 set(APP_COMPILER_FLAGS_f6_f7_fps_uac1 ${SW_USB_AUDIO_FLAGS}  -DI2S_CHANS_DAC=2
                                                         -DI2S_CHANS_ADC=2
                                                         -DAUDIO_CLASS=1
                                                         -DMIN_FREQ=48000
                                                         -DMAX_FREQ=48000
+                                                        -DMCLK_441=512*44100
+                                                        -DMCLK_48=512*48000
                                                         -DUAC1_MODE=1
                                                         -DUSE_EX3D=1
                                                         -DF6_F7_FPS_UAC1=1

sw_usb_audio/app_usb_aud_phaten_golden_6ch/gen_factory.bat

@@ -1,3 +1,3 @@
-xflash bin/fact/app_usb_aud_sy102_fact.xe --loader loader.o --upgrade 2 bin/f5_music_uac1/app_usb_aud_sy102_f5_music_uac1.xe --upgrade 3 bin/f1_music_uac2/app_usb_aud_sy102_f1_music_uac2.xe  --upgrade 1 bin/f3_f4_fps_uac2/app_usb_aud_sy102_f3_f4_fps_uac2.xe -o %1
+xflash bin/fact/app_usb_aud_sy102_fact.xe --loader loader.o --upgrade 2 bin/f5_music_uac1/app_usb_aud_sy102_f5_music_uac1.xe --upgrade 3 bin/f1_music_uac2/app_usb_aud_sy102_f1_music_uac2.xe  --upgrade 1 bin/f3_f4_fps_uac2/app_usb_aud_sy102_f3_f4_fps_uac2.xe --upgrade 4 bin/f6_f7_fps_uac1/app_usb_aud_sy102_f6_f7_fps_uac1.xe -o %1
 
 rem --upgrade 4 bin/f6_f7_fps_uac1/app_usb_aud_sy102_f6_f7_fps_uac1.xe

sw_usb_audio/app_usb_aud_phaten_golden_6ch/src/core/xua_conf.h

@@ -215,6 +215,32 @@
     0x01,                   /* QSPI_WRSR */ \
     0x01,                   /* QSPI_WIP_BIT_MASK */ \
 }
+ #define FL_QUADDEVICE_ZB25VQ32D_2 \
+{ \
+    0,                      /* XT25F16F - Just specify 0 as flash_id */ \
+    256,                    /* page size */ \
+    16384,                   /* num pages */ \
+    3,                      /* address size */ \
+    4,                      /* log2 clock divider */ \
+    0x9F,                   /* QSPI_RDID */ \
+    0,                      /* id dummy bytes */ \
+    3,                      /* id size in bytes */ \
+    0x5E6016,               /* device id */ \
+    0x20,                   /* QSPI_SE */ \
+    4096,                   /* Sector erase is always 4KB */ \
+    0x06,                   /* QSPI_WREN */ \
+    0x04,                   /* QSPI_WRDI */ \
+    PROT_TYPE_SR,           /* Protection via SR */ \
+    {{0x0,0x00},{0,0}},    /* QSPI_SP, QSPI_SU */ \
+    0x02,                   /* QSPI_PP */ \
+    0xEB,                   /* QSPI_READ_FAST */ \
+    1,                      /* 1 read dummy byte */ \
+    SECTOR_LAYOUT_REGULAR,  /* mad sectors */ \
+    {4096,{0,{0}}},         /* regular sector sizes */ \
+    0x05,                   /* QSPI_RDSR */ \
+    0x01,                   /* QSPI_WRSR */ \
+    0x01,                   /* QSPI_WIP_BIT_MASK */ \
+}
 
  #define FL_QUADDEVICE_ZB25VQ32D \
 { \
@@ -226,7 +252,7 @@
     0x9F,                   /* QSPI_RDID */ \
     0,                      /* id dummy bytes */ \
     3,                      /* id size in bytes */ \
-    0x5E8016,               /* device id */ \
+    0x5E4016,               /* device id */ \
     0x20,                   /* QSPI_SE */ \
     4096,                   /* Sector erase is always 4KB */ \
     0x06,                   /* QSPI_WREN */ \
@@ -469,7 +495,7 @@
 
 // DFU_FLASH_DEVICE is a comma-separated list of flash spec structures
 // This define is used in lib_xua/lib_xua/src/dfu/flashlib_user.c
-#define DFU_FLASH_DEVICE  FL_QUADDEVICE_GD25Q32E, FL_QUADDEVICE_ZB25VQ32D, FL_QUADDEVICE_PY25Q32SH, FL_QUADDEVICE_PY25Q32H, FL_QUADDEVICE_XT25F16F, FL_QUADDEVICE_WINBOND_W25Q16JW, FL_QUADDEVICE_UC25HQ16B, FL_QUADDEVICE_WINBOND_W25Q32JVxxxM, FL_QUADDEVICE_MX25R3235, FL_QUADDEVICE_MX25L160E
+#define DFU_FLASH_DEVICE  FL_QUADDEVICE_GD25Q32E, FL_QUADDEVICE_ZB25VQ32D, FL_QUADDEVICE_ZB25VQ32D_2, FL_QUADDEVICE_PY25Q32SH, FL_QUADDEVICE_PY25Q32H, FL_QUADDEVICE_XT25F16F, FL_QUADDEVICE_WINBOND_W25Q16JW, FL_QUADDEVICE_UC25HQ16B, FL_QUADDEVICE_WINBOND_W25Q32JVxxxM, FL_QUADDEVICE_MX25R3235, FL_QUADDEVICE_MX25L160E
 //:
 #include "user_main.h"
 

sw_usb_audio/app_usb_aud_phaten_golden_6ch/src/extensions/audiohw.xc

@@ -108,8 +108,10 @@ unsigned g_new_dac_mode = 0;
 unsigned g_samfreq = 48000;
 unsigned g_dsd_mode = 0;
 // mic detect events: mute_handler (tile[1]) → button_task (tile[0])
-#define MIC_DET_MUTE   1  // mic插入或全拔出，立即mute
-#define MIC_DET_UNMUTE 2  // 插入1s后恢复音量
+#define MIC_DET_MUTE       1  // mic插入或全拔出，立即mute mic
+#define MIC_DET_UNMUTE     2  // 插入1s后恢复mic音量
+#define MIC_DET_DAC_MUTE   3  // mic插入时mute DAC防pop
+#define MIC_DET_DAC_UNMUTE 4  // 1s后恢复DAC音量
 
 unsafe chanend uc_audiohw;  // tile[1] end: AudioHwConfig → button_task (tile[0])
 #if HID_DFU_EN
@@ -154,7 +156,7 @@ port p_sda = PORT_I2C_SDA;
 //out port p_htr3235_sdb = PORT_HTR3236_SDB; /* 连接到HTR3236的SDB引脚，用于控制其电源状态 */
 
 out port p_ctl_mute = PORT_CTL_MUTE;
-in port p_ctl_det = PORT_CTL_DET;
+port p_ctl_det = PORT_CTL_DET;
 
 
 /* Board setup for XU316 MC Audio (1v1) */
@@ -224,6 +226,8 @@ void mic_volume(unsigned level)
     else if(level == NAU88L21_PGA_GAIN_REG_MAX_VALUE)
     {
         // 内部最大值 (reg=38, +1.5dB数字增益，仅firmware使用)
+        // PGA设到最大(37=0x25)，数字增益额外+1.5dB
+        unsafe {NAU88C22_REGWRITE(0x007E, (NAU88L21_PGA_GAIN_REG_MAX_VALUE-1) << 8, (client interface i2c_master_if)i_i2c_client);}
         unsafe {NAU88C22_REGWRITE(0x0035, (0xd2d2), (client interface i2c_master_if)i_i2c_client);}
     }
     else
@@ -403,6 +407,7 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
     unsigned flag_mic_mute = 0;
     unsigned flag_hp_mute = 0;
     unsigned mic_det_muted = 0;  // mic检测导致的mute（不影响LED和g_mic_volume_level）
+    unsigned dac_det_muted = 0;  // mic插入时临时mute DAC防pop（不影响LED）
 
     unsigned push_button_mic_mute_state_old = 1; // Active low
     unsigned push_button_hp_mute_state_old = 1; // Active low
@@ -437,6 +442,22 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
     unsigned char hp_mute_path[] = "hp_mute";
     unsigned char monitor_sw_path[] = "monitor_sw";
     unsigned host_os;
+#if DNR_ENABLE
+    unsigned dnr_init_flag = 0;
+    while (dnr_init_flag == 0)
+    {
+        GET_SHARED_GLOBAL(dnr_init_flag, g_dnr_init_flag);
+        asm("nop");
+    }
+#endif
+#if USE_EX3D == 1
+    unsigned ex3d_key_verified = 0;
+    while (ex3d_key_verified == 0)
+    {
+        GET_SHARED_GLOBAL(ex3d_key_verified, g_ex3d_key_verified);
+        asm("nop");
+    }
+#endif
 
     delay_milliseconds(10);
     saved_mode = load_value(path);
@@ -475,11 +496,19 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
     }
     else
     {
+#if F5_MUSIC_UAC1
       if (saved_mode >= 2) {
+        SetRoleSwitchFlag(MODE_F6_F7_FPS_UAC1);
+        device_reboot();
+        while (1);
+      }
+#elif F6_F7_FPS_UAC1
+      if (saved_mode <= 1) {
         SetRoleSwitchFlag(MODE_F5_MUSIC_UAC1);
         device_reboot();
         while (1);
       }
+#endif
     }
 #endif
 
@@ -489,8 +518,10 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
     if (saved_mode == 255) {
 #if defined(F5_MUSIC_UAC1)
         saved_mode = 1; // f5: default music mode
+#elif defined(F6_F7_FPS_UAC1)
+        saved_mode = 2; // f6/f7: default game mode
 #else
-        saved_mode = 1; // f6/f7: default off
+        saved_mode = 1; // default off
 #endif
         save_value(path, saved_mode);
         debug_printf("Saved game_mode to flash: %d\n", saved_mode);
@@ -633,11 +664,8 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
         mic_mute_blink_tick = 1;
     }
 
-    if ((g_monitor_switch == 1) && !flag_mic_mute && codec_adc_pga_gain_reg_value >= 2) {
-        unsafe { NAU88C22_REGWRITE(0x0030, 0xff00, (client interface i2c_master_if)i_i2c_client); }
-    } else {
-        unsafe { NAU88C22_REGWRITE(0x0030, 0x0000, (client interface i2c_master_if)i_i2c_client); }
-    }
+    // 硬件耳返通路已禁用，改为数字监听（在tile1 UserBufferManagement中实现）
+    // 初始化同步在上方已通过 cc_mic_level <: 0xFE 完成
 
     // DAC 默认音量（mute 时写 0x0000）
     if(dac_level == DAC_LEVEL_MIN)
@@ -706,6 +734,11 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
     }
 #endif
 
+    // 初始化数字监听开关同步到tile1
+    cc_mic_level <: 0xFE;
+    cc_mic_level <: (unsigned)g_monitor_switch;
+    debug_printf("Init monitor sync: sw=%d\n", g_monitor_switch);
+
     // 出厂默认：AI降噪开启，初始化LED和算法
 #if DNR_ENABLE == 1
     if (flag_aidenoise_onoff) {
@@ -963,6 +996,18 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
                         mic_volume(codec_adc_pga_gain_reg_value);
                         debug_printf("mic_det: unmute -> pga=%d\n", codec_adc_pga_gain_reg_value);
                     }
+                } else if (mic_det_cmd == MIC_DET_DAC_MUTE) {
+                    dac_det_muted = 1;
+                    // mute DAC硬件，不改变dac_level/g_volume_level和LED
+                    unsafe { NAU88C22_REGWRITE(0x0034, 0x0000, (client interface i2c_master_if)i_i2c_client); }
+                    debug_printf("mic_det: dac mute\n");
+                } else if (mic_det_cmd == MIC_DET_DAC_UNMUTE) {
+                    dac_det_muted = 0;
+                    // 恢复DAC音量，但如果用户手动hp_mute或dac_level==0则不恢复
+                    if (!flag_hp_mute && dac_level > DAC_LEVEL_MIN) {
+                        dac_volume(dac_level - DAC_LEVEL_MAX);
+                        debug_printf("mic_det: dac unmute -> level=%d\n", dac_level);
+                    }
                 }
                 break;
             }
@@ -1090,6 +1135,19 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
                                 active_mode = 1;
                                 need_reboot = 1;
                                 SetRoleSwitchFlag(MODE_F1_MUSIC_UAC2);
+#elif (F6_F7_FPS_UAC1 == 1)
+                                // UAC1 FPS firmware: music needs F5, reboot if not already music
+                                if (active_mode != 1) {
+                                    active_mode = 1;
+                                    need_reboot = 1;
+                                    SetRoleSwitchFlag(MODE_F5_MUSIC_UAC1);
+                                }
+#elif (F5_MUSIC_UAC1 == 1)
+                                // UAC1 Music firmware: already on music FW, toggle locally
+                                if (active_mode != 1) {
+                                    active_mode = 1;
+                                    mode_btn_change = 1;
+                                }
 #else
                                 active_mode = (active_mode == 1) ? 0 : 1;
                                 mode_btn_change = 1;
@@ -1107,6 +1165,19 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
                                 active_mode = 2;
                                 need_reboot = 1;
                                 SetRoleSwitchFlag(MODE_F3_F4_FPS_UAC2);
+#elif (F5_MUSIC_UAC1 == 1)
+                                // UAC1 Music firmware: game needs F6/F7, reboot if not already game
+                                if (active_mode != 2) {
+                                    active_mode = 2;
+                                    need_reboot = 1;
+                                    SetRoleSwitchFlag(MODE_F6_F7_FPS_UAC1);
+                                }
+#elif (F6_F7_FPS_UAC1 == 1)
+                                // UAC1 FPS firmware: already on FPS FW, switch locally (IR_OFF)
+                                if (active_mode != 2) {
+                                    active_mode = 2;
+                                    mode_btn_change = 1;
+                                }
 #else
                                 active_mode = (active_mode == 2) ? 0 : 2;
                                 mode_btn_change = 1;
@@ -1129,8 +1200,20 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
                         active_mode = 3;
                         need_reboot = 1;
                         SetRoleSwitchFlag(MODE_F3_F4_FPS_UAC2);
+#elif (F5_MUSIC_UAC1 == 1)
+                        // UAC1 Music firmware: AI71 needs F6/F7 FPS, reboot if not already AI71
+                        if (active_mode != 3) {
+                            active_mode = 3;
+                            need_reboot = 1;
+                            SetRoleSwitchFlag(MODE_F6_F7_FPS_UAC1);
+                        }
+#elif (F6_F7_FPS_UAC1 == 1)
+                        // UAC1 FPS firmware: already on FPS FW, switch locally (IR_GAME)
+                        if (active_mode != 3) {
+                            active_mode = 3;
+                            mode_btn_change = 1;
+                        }
 #else
-
                         // FPS firmware: switch algorithm locally (toggle off or activate)
                         active_mode = (active_mode == 3) ? 0 : 3;
                         mode_btn_change = 1;
@@ -1164,6 +1247,26 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
                             active_mode = target;
                             mode_btn_change = 1;
                         }
+#elif (F5_MUSIC_UAC1 == 1)
+                        // UAC1 Music FW: mode 1 local, mode 2/3 need F6/F7 reboot
+                        if (target >= 2) {
+                            active_mode = target;
+                            need_reboot = 1;
+                            SetRoleSwitchFlag(MODE_F6_F7_FPS_UAC1);
+                        } else if (target != active_mode) {
+                            active_mode = target;
+                            mode_btn_change = 1;
+                        }
+#elif (F6_F7_FPS_UAC1 == 1)
+                        // UAC1 FPS FW: mode 2/3 local, mode 1 needs F5 reboot
+                        if (target <= 1) {
+                            active_mode = target;
+                            need_reboot = 1;
+                            SetRoleSwitchFlag(MODE_F5_MUSIC_UAC1);
+                        } else if (target != active_mode) {
+                            active_mode = target;
+                            mode_btn_change = 1;
+                        }
 #else
                         active_mode = target;
                         mode_btn_change = 1;
@@ -1562,7 +1665,8 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
                                         // 增加音量
                                         ++dac_level;
                                         g_volume_level = dac_level;
-                                        dac_volume(dac_level - DAC_LEVEL_MAX);
+                                        if (!dac_det_muted)
+                                            dac_volume(dac_level - DAC_LEVEL_MAX);
                                         save_value(dac_vol_path, dac_level);
 
                                         uint8_t new_led_count = dac_gain_to_led[dac_level];
@@ -1581,10 +1685,12 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
                                         // 减小音量
                                         --dac_level;
                                         g_volume_level = dac_level;
-                                        if(dac_level == DAC_LEVEL_MIN)
-                                            unsafe { NAU88C22_REGWRITE(0x0034, 0x0000, (client interface i2c_master_if)i_i2c_client); }
-                                        else
-                                            dac_volume(dac_level - DAC_LEVEL_MAX);
+                                        if (!dac_det_muted) {
+                                            if(dac_level == DAC_LEVEL_MIN)
+                                                unsafe { NAU88C22_REGWRITE(0x0034, 0x0000, (client interface i2c_master_if)i_i2c_client); }
+                                            else
+                                                dac_volume(dac_level - DAC_LEVEL_MAX);
+                                        }
                                         save_value(dac_vol_path, dac_level);
 
                                         uint8_t new_led_count = dac_gain_to_led[dac_level];
@@ -1656,10 +1762,12 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
                     }
                     else
                     {
-                        if(dac_level == DAC_LEVEL_MIN)
-                            unsafe { NAU88C22_REGWRITE(0x0034, 0x0000, (client interface i2c_master_if)i_i2c_client); }
-                        else
-                            dac_volume(dac_level - DAC_LEVEL_MAX);
+                        if (!dac_det_muted) {
+                            if(dac_level == DAC_LEVEL_MIN)
+                                unsafe { NAU88C22_REGWRITE(0x0034, 0x0000, (client interface i2c_master_if)i_i2c_client); }
+                            else
+                                dac_volume(dac_level - DAC_LEVEL_MAX);
+                        }
                         g_volume_level = dac_level;
                         hp_mute_blink_tick = 0;
                         for(int i = 0; i < 15; i++)
@@ -1712,10 +1820,12 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
                     if (new_level <= DAC_LEVEL_MAX) {
                         uint8_t new_led_count;
                         dac_level = new_level;
-                        if (dac_level == DAC_LEVEL_MIN)
-                            unsafe { NAU88C22_REGWRITE(0x0034, 0x0000, (client interface i2c_master_if)i_i2c_client); }
-                        else
-                            dac_volume(dac_level - DAC_LEVEL_MAX);
+                        if (!dac_det_muted) {
+                            if (dac_level == DAC_LEVEL_MIN)
+                                unsafe { NAU88C22_REGWRITE(0x0034, 0x0000, (client interface i2c_master_if)i_i2c_client); }
+                            else
+                                dac_volume(dac_level - DAC_LEVEL_MAX);
+                        }
                         save_value(dac_vol_path, (unsigned char)dac_level);
                         // 更新DAC音量指示LED
                         new_led_count = dac_gain_to_led[dac_level];
@@ -1764,12 +1874,10 @@ void button_task(chanend c_hidSendData, chanend cc_mic_level, chanend c_uac_vol,
                 if (g_request_monitor_switch_set) {
                     g_request_monitor_switch_set = 0;
                     unsigned new_mon = g_monitor_switch;
-                    // 根据当前mic状态和新的耳返开关值更新reg 0x30
-                    if (new_mon && !flag_mic_mute && codec_adc_pga_gain_reg_value >= 2) {
-                        unsafe { NAU88C22_REGWRITE(0x0030, 0xff00, (client interface i2c_master_if)i_i2c_client); }
-                    } else {
-                        unsafe { NAU88C22_REGWRITE(0x0030, 0x0000, (client interface i2c_master_if)i_i2c_client); }
-                    }
+                    // 同步数字监听开关到tile1
+                    cc_mic_level <: 0xFE;
+                    cc_mic_level <: (unsigned)new_mon;
+                    debug_printf("HID monitor sync: sw=%d\n", new_mon);
                     save_value(monitor_sw_path, (unsigned char)new_mon);
                     debug_printf("HID SET_MONITOR_SWITCH: %d\n", new_mon);
                 }
@@ -2018,6 +2126,8 @@ void mute_handler(chanend c_mic_det)
     unsigned mic1_in = (det_val >> 1) & 1;       // bit1: 1=inserted
     unsigned mic2_in = ((det_val >> 2) & 1) ^ 1; // bit2: 0=inserted, invert
     unsigned any_mic_in = mic1_in || mic2_in;
+    unsigned prev_mic1_in = mic1_in;
+    unsigned prev_mic2_in = mic2_in;
     unsigned prev_any_mic_in = any_mic_in;
 
     // 如果开机时全拔出，发送mute
@@ -2042,13 +2152,28 @@ void mute_handler(chanend c_mic_det)
                 mic2_in = ((det_val >> 2) & 1) ^ 1;
                 any_mic_in = mic1_in || mic2_in;
 
-                if (any_mic_in != prev_any_mic_in) {
-                    // 状态变化：立即mute防止pop音
+                // 检测单个mic插拔事件
+                unsigned mic1_changed = (mic1_in != prev_mic1_in);
+                unsigned mic2_changed = (mic2_in != prev_mic2_in);
+                unsigned any_changed = mic1_changed || mic2_changed;
+
+                if (any_changed) {
+                    // 状态变化：立即mute mic和DAC防止pop音
+                    p_ctl_mute <: 0;
                     c_mic_det <: (unsigned)MIC_DET_MUTE;
-                    debug_printf("mic det change: mic1=%d mic2=%d -> mute\n", mic1_in, mic2_in);
+                   // c_mic_det <: (unsigned)MIC_DET_DAC_MUTE;
+
+                    // 配置ADC
+                    //c_mic_det <: (unsigned)MIC_DET_REINIT_CODEC;
+                    p_ctl_det <: 0;
+                    delay_milliseconds(100);
+
+                    //debug_printf("mic det change: mic1=%d mic2=%d -> mute all & reconfig\n", mic1_in, mic2_in);
+                    p_ctl_det :> det_val;
 
                     // 等1s让插拔稳定
-                    delay_milliseconds(1000);
+                    delay_milliseconds(900);
+                    p_ctl_mute <: 0xf;
 
                     // 重新读取稳定状态
                     p_ctl_det :> det_val;
@@ -2056,13 +2181,18 @@ void mute_handler(chanend c_mic_det)
                     mic2_in = ((det_val >> 2) & 1) ^ 1;
                     any_mic_in = mic1_in || mic2_in;
 
-                    if (any_mic_in) {
-                        // 有mic插入，恢复音量
-                        c_mic_det <: (unsigned)MIC_DET_UNMUTE;
-                        debug_printf("mic stable inserted -> unmute\n");
-                    }
-                    // 全拔出则保持mute，不发UNMUTE
+                    // 恢复DAC状态
+                    c_mic_det <: (unsigned)MIC_DET_DAC_UNMUTE;
 
+                    if (any_mic_in) {
+                        // 有mic插入，恢复mic音量状态
+                        c_mic_det <: (unsigned)MIC_DET_UNMUTE;
+                        debug_printf("mic stable -> unmute\n");
+                    }
+                    // 全拔出则保持mic mute
+
+                    prev_mic1_in = mic1_in;
+                    prev_mic2_in = mic2_in;
                     prev_any_mic_in = any_mic_in;
 
                     // 重新同步timer

sw_usb_audio/app_usb_aud_phaten_golden_6ch/src/extensions/dfu_flash_interface.c

@@ -14,7 +14,7 @@
 #if HID_DFU_EN
 
 #ifndef DFU_FLASH_MAX_UPGRADE_SIZE
-#define DFU_FLASH_MAX_UPGRADE_SIZE (1600 * 1024)
+#define DFU_FLASH_MAX_UPGRADE_SIZE (2200 * 1024)
 #endif
 
 #define DFU_FLASH_ERROR()

sw_usb_audio/app_usb_aud_phaten_golden_6ch/src/extensions/dnr/dnr_dsp.c

@@ -16,12 +16,17 @@
 
 #if DNR_ENABLE == 1
 unsigned  g_dsp_eof = 0;
+extern float g_dnr_level; 
 void dnr_exchange_buffer(int32_t *data) {
     static unsigned buff_index = 0;
-    write_to_sample_in_buf(data[1], buff_index, 0);
-    read_from_sample_out_buf(&data[1],buff_index, 0);
+    int dnr_level = (int)g_dnr_level;
+    if (dnr_level != 0) {
+        write_to_sample_in_buf(data[1], buff_index, 0);
+        read_from_sample_out_buf(&data[1],buff_index, 0);
+    }
     data[0] = data[1];
 
+
     buff_index++;
 #if DNR_11MS
     if (buff_index == 128)

sw_usb_audio/app_usb_aud_phaten_golden_6ch/src/extensions/dsp.c

@@ -67,6 +67,9 @@ unsigned g_dnr_on_off_t1 = DNR_OFF;     // Default DNR off
 #define MUTE_OFF 0
 unsigned g_mute_on_off_t1 = MUTE_ON;
 
+// 数字监听 tile1 共享变量（由 tile0 通过 cc_mic_level 通道同步）
+unsigned g_monitor_switch_t1 = 0;       // 耳返开关 tile1 副本（0=关闭，1=开启）
+
 unsigned g_mute_on_off_t0 = MUTE_OFF;
 
 unsigned g_game_mode = 0;
@@ -84,12 +87,21 @@ chanend_t uc_dsp_to_dnr_t1;
 //chanend_t uc_dsp_to_dnr_t0;
 chanend_t uc_key_to_ubm_t0;
 volatile EXTERN DS_BOOL m_hThread;
+extern unsigned g_dnr_init_flag;
 void SetEqDataChan (chanend_t c) {
     uc_eq_data = c;
 }
 void key_receiver(chanend_t c)
 {
     debug_printf("===> key_receiver\n");
+#if DNR_ENABLE
+    unsigned dnr_init_flag = 0;
+    while (dnr_init_flag == 0) {
+        GET_SHARED_GLOBAL(dnr_init_flag, g_dnr_init_flag);
+        asm("nop");
+    }
+
+#endif
    // tile0
     // load the license key
     // This function must be called before audio_ex3d_activate_key.
@@ -135,11 +147,11 @@ enum {UBM_A3D_OFF=0, UBM_A3D_VON=1, UBM_A3D_ON=2};
 extern void buffer_exchange(chanend_t c_data, unsigned sampsFromUsbToAudio[], unsigned sampsFromAudioToUsb[], unsigned sample_freq);
 extern unsigned int is_eq_disabled(void);
 extern unsigned int g_eq_enable;
+
 void UserBufferManagement(unsigned sampsFromUsbToAudio[], unsigned sampsFromAudioToUsb[])
 {
     uint32_t is_3d;
-    uint32_t is_dnr;
-    uint32_t is_mute;
+    unsigned is_monitor;
 #if UAC1_MODE
     return;
 #endif
@@ -151,8 +163,6 @@ void UserBufferManagement(unsigned sampsFromUsbToAudio[], unsigned sampsFromAudi
 #endif
 
     GET_SHARED_GLOBAL(is_3d, g_3d_on_off_t1);
-    GET_SHARED_GLOBAL(is_dnr, g_dnr_on_off_t1);
-    GET_SHARED_GLOBAL(is_mute, g_mute_on_off_t1);
 #if (HID_CONTROLS > 0)
     AUDIO_T absVal, maxVal;
 #endif
@@ -243,6 +253,11 @@ void UserBufferManagement(unsigned sampsFromUsbToAudio[], unsigned sampsFromAudi
 #elif DNR_ENABLE == 1
     buffer_exchange(uc_eq_data, sampsFromUsbToAudio, sampsFromAudioToUsb, ubm_sample_freq);
 #endif
+    GET_SHARED_GLOBAL(is_monitor, g_monitor_switch_t1);
+    if (is_monitor) {
+        sampsFromUsbToAudio[0] += (sampsFromAudioToUsb[0]);
+        sampsFromUsbToAudio[1] += (sampsFromAudioToUsb[1]);
+    }
 }
 
 
@@ -499,10 +514,10 @@ void hid_receive_task_in_c(unsigned char * RcvData, unsigned * SendData)
 //                    if (cur_mode == IR_MUSIC) {
 //                        sfIdxName = spatial_music;
 //                    } else {
-//                        sfIdxName = spatial_movie;    
+//                        sfIdxName = spatial_movie;
 //                    }
 //                }
-#else   
+#else
                 const char * sfIdxName = "EXTREME";
 #endif
                 int32_t NameLen = strlen(sfIdxName);
@@ -868,13 +883,13 @@ void hid_button_task(chanend_t cc_mic_level, chanend_t c_hidRcvData, chanend_t c
             tmp = chan_in_word(cc_mic_level);
             debug_printf("event_mic_vol received: 0x%02X\n", tmp);
 
-#if USE_EX3D == 1
             if (tmp == 0xFC) {
                 // 音频模式命令：来自 audiohw.xc button_task 的模式切换
+                // 必须先读取payload，无论是否启用EX3D
                 current_mode_local = chan_in_word(cc_mic_level);
                 if (current_mode_local > 3) current_mode_local = 0;
                 debug_printf("hid_button_task received audio_mode: %d\n", current_mode_local);
-
+#if USE_EX3D == 1
                 if (current_mode_local == 0) {
                     // 无音效模式：关闭EX3D和EQ算法
                     audio_ex3d_set_onoff(0);
@@ -888,7 +903,7 @@ void hid_button_task(chanend_t cc_mic_level, chanend_t c_hidRcvData, chanend_t c
                 } else if (current_mode_local == 1) {
                     // 音乐模式：EX3D关闭，EQ开启
                     audio_ex3d_set_onoff(0);
-                    g_eq_enable = 1;
+                    //g_eq_enable = 1;
 #if IR_SWITCHING_MODE
                     is_3d_on = IR_OFF;
 #else
@@ -896,8 +911,15 @@ void hid_button_task(chanend_t cc_mic_level, chanend_t c_hidRcvData, chanend_t c
 #endif
                     debug_printf("Mode 1: MUSIC, EQ ON, EX3D OFF\n");
                 } else if (current_mode_local == 2) {
+#if (F6_F7_FPS_UAC1 == 1)
+                    // UAC1 Game模式: EX3D关闭, EQ开启, IR_OFF
+                    //g_eq_enable = 1;
+                    audio_ex3d_set_onoff(0);
+                    is_3d_on = IR_OFF;
+                    debug_printf("Mode 2: UAC1 GAME, EQ ON, EX3D OFF (IR_OFF)\n");
+#else
                     // 游戏模式 (IR_GAME, stereo): SF index 0，EQ开启
-                    g_eq_enable = 1;
+                    //g_eq_enable = 1;
 #if IR_SWITCHING_MODE
                     audio_ex3d_set_sf(0);      // SF 0 = STEREO GAME
                     is_3d_on = IR_GAME;
@@ -906,7 +928,16 @@ void hid_button_task(chanend_t cc_mic_level, chanend_t c_hidRcvData, chanend_t c
 #endif
                     audio_ex3d_set_onoff(1);
                     debug_printf("Mode 2: GAME (IR_GAME) ON, sf=0, EQ ON\n");
+#endif
                 } else if (current_mode_local == 3) {
+#if (F6_F7_FPS_UAC1 == 1)
+                    // UAC1 AI71模式: EX3D开启, SF index 0 (stereo game), EQ开启, IR_GAME
+                    //g_eq_enable = 1;
+                    audio_ex3d_set_sf(0);      // SF 0 = STEREO GAME
+                    is_3d_on = IR_GAME;
+                    audio_ex3d_set_onoff(1);
+                    debug_printf("Mode 3: UAC1 AI71 (IR_GAME) ON, sf=0, EQ ON\n");
+#else
                     // AI7.1模式 (IR_7_1_GAME, 7.1): SF index 1，EQ开启
                     g_eq_enable = 1;
 #if IR_SWITCHING_MODE
@@ -917,18 +948,28 @@ void hid_button_task(chanend_t cc_mic_level, chanend_t c_hidRcvData, chanend_t c
 #endif
                     audio_ex3d_set_onoff(1);
                     debug_printf("Mode 3: AI7.1 (IR_7_1_GAME) ON, sf=1, EQ ON\n");
+#endif
                 }
                 SET_SHARED_GLOBAL(g_3d_on_off_t1, is_3d_on);
+#endif
             } else if (tmp == 0xFD) {
                 // 脚步增强按键发来的 expand gain 命令
+                // 必须先读取payload，无论是否启用EX3D
                 int32_t gain = (int32_t)chan_in_word(cc_mic_level);
+#if USE_EX3D == 1
                 if ((0 <= gain) && (gain <= 20)) {
                     Ex3dExpandGain = gain;
                     EX3DAudio_SetExpandGain(Ex3dExpandGain);
                     debug_printf("Button set CMD_EXPAND_GAIN: %d\n", gain);
                 }
+#endif
+            } else if (tmp == 0xFE) {
+                // 数字监听开关同步命令：来自 tile0（所有模式都需要处理）
+                unsigned mon_sw = chan_in_word(cc_mic_level);
+                SET_SHARED_GLOBAL(g_monitor_switch_t1, mon_sw);
+                debug_printf("Monitor sync: sw=%d\n", mon_sw);
             } else {
-                // Mic 静音状态命令
+                // Mic 静音状态命令（所有模式都需要处理）
                 switch (tmp) {
                    case MUTED_MIC:
                         SET_SHARED_GLOBAL(g_mute_on_off_t1, MUTE_ON);
@@ -945,7 +986,6 @@ void hid_button_task(chanend_t cc_mic_level, chanend_t c_hidRcvData, chanend_t c
                         break;
                 }
             }
-#endif
         }
         continue;
 
@@ -1367,4 +1407,4 @@ int dsp_worker_tile(chanend_t c_dsp_to_ex3d, int worker_id){
     return 0;
 }
 
-#endif
+#endif

sw_usb_audio/app_usb_aud_phaten_golden_6ch/src/extensions/dsp_core0.xc

@@ -36,6 +36,8 @@ extern uint32_t get_reference_time(void);
 extern void update_eq_post_gain(void);
 extern unsigned int g_eq_sample_rate;
 extern unsigned g_windows_detect_done;
+extern unsigned g_dnr_init_flag;
+extern unsigned g_ex3d_key_verified;
 
 #pragma unsafe arrays
 void dsp_core0(void)
@@ -55,11 +57,31 @@ void dsp_core0(void)
     // EQ Flash存储初始化标志
 
     delay_milliseconds(300);
-    unsigned windows_detect_done;
+    unsigned windows_detect_done, dnr_init_flag, ex3d_key_verified;
     GET_SHARED_GLOBAL(windows_detect_done, g_windows_detect_done);
-    while (windows_detect_done == 0) {
+#if DNR_ENABLE
+    GET_SHARED_GLOBAL(dnr_init_flag, g_dnr_init_flag);
+#endif
+#if USE_EX3D
+    GET_SHARED_GLOBAL(ex3d_key_verified, g_ex3d_key_verified);
+#endif
+    while ((windows_detect_done == 0)
+#if DNR_ENABLE
+     || (dnr_init_flag == 0) 
+#endif
+#if USE_EX3D
+     || (ex3d_key_verified == 0)
+#endif
+     ) {
         asm("nop");
         GET_SHARED_GLOBAL(windows_detect_done, g_windows_detect_done);
+#if DNR_ENABLE
+        GET_SHARED_GLOBAL(dnr_init_flag, g_dnr_init_flag);
+#endif
+#if USE_EX3D
+        GET_SHARED_GLOBAL(ex3d_key_verified, g_ex3d_key_verified);
+#endif
+
     }
 
 #if EQ_EN

sw_usb_audio/app_usb_aud_phaten_golden_6ch/src/extensions/lfs_services.c

@@ -13,7 +13,7 @@ swlock_t lfs_lock = SWLOCK_INITIAL_VALUE;
 static rtos_qspi_flash_t qspi_flash_ctx_s;
 #define FLASH_CLKBLK XS1_CLKBLK_3
 #ifndef FS_BASE_ADDR
-#define FS_BASE_ADDR 0x1a0000
+#define FS_BASE_ADDR (2500 * 1024)
 #endif
 #define SECTOR_SIZE  4096
 rtos_qspi_flash_t *qspi_flash_ctx = &qspi_flash_ctx_s;

sw_usb_audio/app_usb_aud_phaten_golden_6ch/src/extensions/main.xc

@@ -571,6 +571,7 @@ int main()
 
             unsafe {
               SetEqDataChan(c_eq_data); 
+              delay_milliseconds(200);
               key_sender(c_key);
               for (int i = 0; i < DSP_WORKER_COUNT; i++)
                 uc_dsp_to_ex3d[i] = (chanend)c_dsp_to_ex3d[i];