update
update
This commit is contained in:
PhatenIoT-yan
@@ -42,9 +42,9 @@ title: A316-HF-DAC-V1 USB HiFi Audio Decoder Evaluation Board User Manual
|
||||
|
||||
</div>
|
||||
|
||||
## Consultation & Feedback
|
||||
## Contact and Feedback
|
||||
<details>
|
||||
<summary>Click to expand consultation and feedback form</summary>
|
||||
<summary>Click to expand contact and feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
---
|
||||
title: A316-HF-DAC-V1 USB Desktop High-Definition Audio Decoder Evaluation Board Specification
|
||||
title: A316-HF-DAC-V1 USB Desktop Hi-Fi Audio Decoder Evaluation Board Datasheet
|
||||
---
|
||||
|
||||
|
||||
# A316-HF-DAC-V1 USB Desktop High-Definition Audio Decoder Evaluation Board Specification
|
||||
# A316-HF-DAC-V1 USB Desktop Hi-Fi Audio Decoder Evaluation Board Datasheet
|
||||
<div class="grid cards" markdown>
|
||||
- {width="200"} {width="200"} **Jointly Supported** <br> [XMOS Official Website: www.xmos.com](https://www.xmos.com) <br> [Phaten Audio Solutions Official Website: www.phaten-audio.com](https://www.phaten-audio.com)
|
||||
- {width="200"} {width="200"} **Joint Support** <br> [XMOS Official Website: www.xmos.com](https://www.xmos.com) <br> [Phaten Audio Solutions Official Website: www.phaten-audio.com](https://www.phaten-audio.com)
|
||||
</div>
|
||||
|
||||
<div class="result" markdown>
|
||||
{align=right width=250}
|
||||
## 1. Product Introduction
|
||||
{align=right width=250}
|
||||
## 1. Product Overview
|
||||
### 1.1 Product Description
|
||||
|
||||
A316-HF-DAC-V1 is an evaluation board specifically designed for USB desktop high-definition audio decoders, utilizing Phaten A316_1926V1 XU316 module design. The evaluation board supports USB, optical, coaxial, and I2S audio signal source inputs. Different audio input sources can be selected via buttons. The evaluation board uses an AKM4493SEQ DAC to output analog audio.
|
||||
The A316-HF-DAC-V1 is an evaluation board specifically designed for USB desktop hi-fi audio decoders, featuring the Phaten A316_1926V1 XU316 module. The evaluation board supports USB, optical, coaxial, and I2S audio source inputs. Different audio input sources can be selected via buttons. The evaluation board employs an AKM4493SEQ DAC for analog audio output.
|
||||
</div>
|
||||
|
||||
### 1.2 Evaluation Board Features
|
||||
@@ -23,12 +23,12 @@ A316-HF-DAC-V1 is an evaluation board specifically designed for USB desktop high
|
||||
- I2S/TDM
|
||||
- S/PDIF (Optical/Coaxial)
|
||||
- Direct Stream Digital (DSD)
|
||||
- **Supported Audio Sampling Rates**
|
||||
- **Supported Audio Sample Rates**
|
||||
- PCM: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, 768KHz
|
||||
- DSD: DSD 64, DSD 128, DSD 256, DSD 512
|
||||
- DSD: DSD 64, DSD 128, DSD 256, DSD 512
|
||||
- DOP: DOP 64, DOP 128, DOP256
|
||||
- **System Compatibility**
|
||||
- UAC 2.0 protocol, supports ASIO, compatible with various operating systems including Windows, Linux, Android, MAC OS, and IOS
|
||||
- UAC 2.0 protocol, supports ASIO, compatible with multiple operating systems including Windows, Linux, Android, MAC OS, and iOS
|
||||
|
||||
### 1.3 Evaluation Board Hardware Interfaces
|
||||
|
||||
@@ -37,48 +37,48 @@ A316-HF-DAC-V1 is an evaluation board specifically designed for USB desktop high
|
||||
<figcaption></figcaption>
|
||||
</figure>
|
||||
|
||||
| Interface | Function
|
||||
| :---------------------| :----------
|
||||
| Type-C | Connection to PC/mobile USB, USB audio input and 5V power supply
|
||||
| S/PDIF | Optical/coaxial digital audio input
|
||||
| I2S | I2S input
|
||||
| Output | RCA left and right channel analog audio output
|
||||
| Interface | Function
|
||||
| :-------------------| :----------
|
||||
| Type-C | Connect to PC/smartphone USB for audio input and 5V power supply
|
||||
| S/PDIF | Optical/coaxial digital audio input
|
||||
| I2S | I2S input
|
||||
| Output | RCA left and right channel analog audio output
|
||||
|
||||
|
||||
### 1.4 Evaluation Board Key Audio Specifications
|
||||
|
||||
**USB Audio Input with DAC AKM4493**
|
||||
**USB Audio Input with AKM4493 DAC**
|
||||
|
||||
| Parameter | Value
|
||||
| :-------------------------| :----------:
|
||||
| THD+N RATIO | 108.232dB
|
||||
| SIGNAL-NOISE RATIO | 120.012dB
|
||||
| RCAOUT Crosstalk(10K) | 111.851dB
|
||||
| Parameter | Value
|
||||
| :------------------------| :----------:
|
||||
| THD+N RATIO | 108.232dB
|
||||
| SIGNAL-NOISE RATIO | 120.012dB
|
||||
| RCAOUT Crosstalk(10K) | 111.851dB
|
||||
|
||||
**S/PDIF Audio Input with DAC AKM4493**
|
||||
**S/PDIF Audio Input with AKM4493 DAC**
|
||||
|
||||
| Parameter | Value
|
||||
| :-------------------------| :----------:
|
||||
| THD+N RATIO | 108.380dB
|
||||
| SIGNAL-NOISE RATIO | 118.483dB
|
||||
| RCAOUT Crosstalk(10K) | 115.302dB
|
||||
| Parameter | Value
|
||||
| :------------------------| :----------:
|
||||
| THD+N RATIO | 108.380dB
|
||||
| SIGNAL-NOISE RATIO | 118.483dB
|
||||
| RCAOUT Crosstalk(10K) | 115.302dB
|
||||
|
||||
|
||||
### 1.5 Normal Operating Conditions
|
||||
| Function | Minimum | Maximum | Unit |
|
||||
|:--------------|:-------:|:-------:|:----:|
|
||||
| Operating Temperature | 0 | 70 | °C |
|
||||
| Operating Voltage | 4.5 | 5 | V |
|
||||
|:---------|:------:|:------:|:----:|
|
||||
| Operating Temperature | 0 | 70 | ℃ |
|
||||
| Operating Voltage | 4.5 | 5 | V |
|
||||
|
||||
### 1.8 Operating Current
|
||||
| Operating Status | Average | Peak | Unit |
|
||||
|:--------------|:-------:|:-----:|:----:|
|
||||
| @5V | 250 | 300 | mA |
|
||||
| Operating State | Average | Peak | Unit |
|
||||
|:---------|:------:|:------:|:----:|
|
||||
| @5V | 250 | 300 | mA |
|
||||
|
||||
## Consultation and Feedback
|
||||
|
||||
## Contact and Feedback
|
||||
<details>
|
||||
<summary>Click to expand consultation feedback form</summary>
|
||||
<summary>Click to expand contact and feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
|
||||
@@ -16,9 +16,9 @@ login: true
|
||||
| BOM | :material-file-document-outline: A316-HF-DAC-V1 BOM | <a href="javascript:void(0);" onclick="checkLogin('/assets/download/a316_hf_dac_v1/a316_hf_dac_v1_PCBA.xlsx')">:material-download:</a> |
|
||||
| Component Datasheets | :material-file-document-outline: A316-HF-DAC-V1 Component Datasheets | <a href="javascript:void(0);" onclick="checkLogin('/assets/download/a316_hf_dac_v1/元器件规格书.zip')">:material-download:</a> |
|
||||
|
||||
## Consultation & Feedback
|
||||
## Contact and Feedback
|
||||
<details>
|
||||
<summary>Click to expand consultation and feedback form</summary>
|
||||
<summary>Click to expand contact and feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
|
||||
@@ -96,9 +96,9 @@ __USB HiFi Audio Decoder Evaluation Board with USB/SPDIF Input and I2S Output__
|
||||
|
||||
</div>
|
||||
|
||||
## Consultation & Feedback
|
||||
## Contact and Feedback
|
||||
<details>
|
||||
<summary>Click to expand consultation and feedback form</summary>
|
||||
<summary>Click to expand contact and feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
---
|
||||
title: PBAX316-90108MV1 USB Desktop High-Definition Audio Decoder Evaluation Board Test Specifications
|
||||
title: PBAX316-90108MV1 USB Desktop Hi-Fi Audio Decoder Evaluation Board Test Specifications
|
||||
---
|
||||
|
||||
|
||||
# PBAX316-90108MV1 USB Desktop High-Definition Audio Decoder Evaluation Board Test Specifications
|
||||
# PBAX316-90108MV1 USB Desktop Hi-Fi Audio Decoder Evaluation Board Test Specifications
|
||||
<div class="grid cards" markdown>
|
||||
- {width="200"} {width="200"} **Joint Support** <br> [XMOS Website: www.xmos.com](https://www.xmos.com) <br> [Phaten Audio Solution Official Website: www.phaten-audio.com](https://www.phaten-audio.com)
|
||||
- {width="200"} {width="200"} **Joint Support** <br> [XMOS Official Website: www.xmos.com](https://www.xmos.com) <br> [Phaten Audio Solutions Official Website: www.phaten-audio.com](https://www.phaten-audio.com)
|
||||
</div>
|
||||
|
||||
## 1. USB INPUT 1KHz RCAOUT Test Specifications
|
||||
## 1. USB INPUT 1kHz RCAOUT Test Specifications
|
||||
### THD+N Ratio
|
||||
|
||||
|
||||
@@ -31,7 +31,7 @@ title: PBAX316-90108MV1 USB Desktop High-Definition Audio Decoder Evaluation Boa
|
||||
|
||||
|
||||
|
||||
## 2. S/PDIF INPUT 1KHz RCAOUT Test Specifications
|
||||
## 2. S/PDIF INPUT 1kHz RCAOUT Test Specifications
|
||||
### THD+N Ratio
|
||||
|
||||
|
||||
@@ -53,9 +53,9 @@ title: PBAX316-90108MV1 USB Desktop High-Definition Audio Decoder Evaluation Boa
|
||||
### Noise Level
|
||||
|
||||
|
||||
## Consultation & Feedback
|
||||
## Contact and Feedback
|
||||
<details>
|
||||
<summary>Click to expand consultation and feedback form</summary>
|
||||
<summary>Click to expand contact and feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
|
||||
@@ -9,12 +9,12 @@ login: true
|
||||
--8<-- "common/phaten_xmos_support_img.md"
|
||||
--8<-- "common/checklogin_form.md"
|
||||
<div class="result" markdown>
|
||||
{align=right width=300 style="float: right; margin: -30px 0 0 0;" }
|
||||
{align=right width=300 style="float: right; margin: -30px 0 0 0;" }
|
||||
|
||||
## 1. Evaluation Board Hardware Specifications
|
||||
|
||||
- A316-HF-DAC-V1 is an evaluation board designed for USB desktop high-definition audio decoders, utilizing the Phaten Audio A316_1926V1 XU316 module design. The evaluation board supports USB, optical, coaxial, and I2S audio signal source inputs. Different audio input sources can be selected via buttons.
|
||||
- The evaluation board features AKM4493SEQ DAC for analog audio output.
|
||||
- The A316-HF-DAC-V1 is an evaluation board specifically designed for USB desktop hi-fi audio decoders, featuring the Phaten Audio A316_1926V1 XU316 module. The evaluation board supports USB, optical, coaxial, and I2S audio source inputs. Different audio input sources can be selected via buttons.
|
||||
- The evaluation board employs an AKM4493SEQ DAC for analog audio output.
|
||||
|
||||
</div>
|
||||
|
||||
@@ -41,7 +41,7 @@ login: true
|
||||
|
||||
|
||||
=== "Key Audio Specifications"
|
||||
**USB Audio Input, Matched with DAC AKM4493**
|
||||
**USB Audio Input with AKM4493 DAC**
|
||||
|
||||
| Parameter | Value
|
||||
| :------------------------| :----------:
|
||||
@@ -49,7 +49,7 @@ login: true
|
||||
| SIGNAL-NOISE RATIO | 120.012dB
|
||||
| RCAOUT Crosstalk(10K) | 111.851dB
|
||||
|
||||
**S/PDIF Audio Input, Matched with DAC AKM4493**
|
||||
**S/PDIF Audio Input with AKM4493 DAC**
|
||||
|
||||
| Parameter | Value
|
||||
| :------------------------| :----------:
|
||||
@@ -73,30 +73,30 @@ login: true
|
||||
|
||||
### Installing Windows Driver
|
||||
!!! note
|
||||
- Upon receiving the evaluation board, if this is your first time using it and you are on a Windows system, you need to install the Windows driver before conducting evaluation tests.
|
||||
- Windows 10 build 1809 and later versions have native USB UAC 2.0 drivers. However, the native driver can only play audio at sampling rates up to 384Khz. To evaluate 768Khz sampling rates and DSD format, you need to install a third-party driver.
|
||||
- Linux, Mac, and mobile devices do not require driver installation
|
||||
- Upon receiving the evaluation board, if this is your first use on a Windows system, you need to install the Windows driver before conducting evaluation tests.
|
||||
- Windows 10 build 1809 and later versions include native USB UAC 2.0 drivers. However, the native driver only supports audio playback up to 384kHz sampling rate. To evaluate 768kHz sampling rates and DSD formats, a third-party driver installation is required.
|
||||
- Linux, Mac, and mobile devices do not require driver installation.
|
||||
|
||||
1. <a href="javascript:void(0);" onclick="checkLogin('/assets/download/driver/Thesycon-USB-Audio-Class-2_0-Evaluation-Driver-for-Windows_5_58_0.zip')">Download evaluation version driver</a>. After extracting, run XMOS_TUSBAudio_eval_v5.58.0_2023-06-29_setup.exe directly and follow the default installation process.
|
||||
1. <a href="javascript:void(0);" onclick="checkLogin('/assets/download/driver/Thesycon-USB-Audio-Class-2_0-Evaluation-Driver-for-Windows_5_58_0.zip')">Download evaluation driver</a>. After extraction, run XMOS_TUSBAudio_eval_v5.58.0_2023-06-29_setup.exe directly and follow the default installation process.
|
||||
|
||||
2. Connect the evaluation board to the Windows computer via USB cable. Click on the TUSB icon in the lower right corner. If the USB Audio Device displays as shown in the figure, the driver is running normally.
|
||||
2. Connect the evaluation board to the Windows computer via USB cable. Click the TUSB icon in the system tray. If the USB Audio Device displays as shown in the figure, the driver is running normally.
|
||||
|
||||
3. The evaluation board enumerates as USB 2.0 Audio Devices (UAC2.0) in Device Manager
|
||||
3. The evaluation board will enumerate as USB 2.0 Audio Devices (UAC2.0) in Device Manager.
|
||||
|
||||
4. In the playback tab, set USB 2.0 Audio Devices (UAC2.0) as the default device
|
||||
4. In the playback settings, set USB 2.0 Audio Devices (UAC2.0) as the default device.
|
||||
|
||||
|
||||
|
||||
### Audio Evaluation
|
||||
The evaluation board has 3 indicator lights: USB, OPT, COX, representing USB, optical, and coaxial modes respectively.
|
||||
The evaluation board features 3 indicator lights: USB, OPT, COX, representing USB, optical, and coaxial modes respectively.
|
||||
|
||||
- Short press MODE button, USB indicator lights up, plays USB audio.
|
||||
- Short press MODE button, OPT indicator lights up, plays OPT audio.
|
||||
- Short press MODE button, COX indicator lights up, plays COX audio.
|
||||
- Short press the MODE button: USB indicator lights up, plays USB audio.
|
||||
- Short press the MODE button: OPT indicator lights up, plays optical audio.
|
||||
- Short press the MODE button: COX indicator lights up, plays coaxial audio.
|
||||
|
||||
## Consultation & Feedback
|
||||
## Contact and Feedback
|
||||
<details>
|
||||
<summary>Click to expand consultation and feedback form</summary>
|
||||
<summary>Click to expand contact and feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
|
||||
@@ -14,11 +14,11 @@ login: true
|
||||
## 1. Product Introduction
|
||||
### 1.1 Product Description
|
||||
|
||||
- A316-HF-I2S-V1 is based on the A316-Mini--V1 XU316 module design, **DAC removed**, focused on **USB digital signal reception and conversion**
|
||||
- A316-HF-I2S-V1 is designed based on the A316-Mini--V1 XU316 module, **with DAC removed**, focusing on **USB digital signal reception and conversion**
|
||||
- A316-HF-I2S-V1 receives 2-channel USB input, decodes it, and outputs via I2S
|
||||
- All XU316 pins are accessible on the evaluation board, allowing users to perform various development and debugging tasks with the XU316 based on this evaluation board
|
||||
- A316-HF-I2S-V1 integrates 2 low-jitter 45.1584MHz/49.152MHz active crystal oscillators
|
||||
- Combined with different DACs, users can use this evaluation board for evaluating various USB HiFi applications, suitable for audio device developers and Hi-Fi DIY enthusiasts building high-fidelity audio decoding systems
|
||||
- All XU316 pins are exposed on the evaluation board, allowing users to perform various development and debugging tasks for XU316 based on this evaluation board
|
||||
- A316-HF-I2S-V1 features 2 built-in low phase noise 45.1584MHz/49.152MHz active crystal oscillators
|
||||
- Combined with different DACs, users can use this evaluation board for various USB HiFi application evaluations, suitable for audio equipment developers and Hi-Fi DIY enthusiasts to build high-fidelity audio decoding systems
|
||||
</div>
|
||||
|
||||
### 1.2 Product Features
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
---
|
||||
title: A316-HF-I2S-V1 USB TO I2S HiFi Audio Converter EVB
|
||||
description: A316-HF-I2S-V1 is a professional USB TO I2S HiFi audio converter evaluation board supporting 768kHz/DSD512 high-resolution audio, based on XU316 module design, specifically designed for audio device developers and Hi-Fi DIY enthusiasts.
|
||||
keywords: USB TO I2S converter, HiFi audio converter, XU316 module, 768kHz/DSD512, MQA decoding, optical coaxial input
|
||||
title: A316-HF-I2S-V1 USB TO I2S HiFi Audio Converter Evaluation Board
|
||||
description: A316-HF-I2S-V1 is a professional USB TO I2S HiFi audio converter evaluation board, supporting 768kHz/DSD512 high-resolution audio, based on XU316 module design, specifically designed for audio device developers and Hi-Fi DIY enthusiasts.
|
||||
keywords: USB TO I2S Converter, HiFi Audio Converter, XU316 Module, 768kHz/DSD512, MQA Decoding, Optical Coaxial Input
|
||||
hide:
|
||||
-toc
|
||||
login: true
|
||||
@@ -13,7 +13,7 @@ login: true
|
||||
"@context": "https://schema.org",
|
||||
"@type": "Product",
|
||||
"name": "A316-HF-I2S-V1 USB TO I2S HiFi Audio Converter Evaluation Board",
|
||||
"description": "A316-HF-I2S-V1 is a professional USB TO I2S HiFi audio converter evaluation board supporting 768kHz/DSD512 high-resolution audio, based on XU316 module design, specifically designed for audio device developers and Hi-Fi DIY enthusiasts.",
|
||||
"description": "A316-HF-I2S-V1 is a professional USB TO I2S HiFi audio converter evaluation board, supporting 768kHz/DSD512 high-resolution audio, based on XU316 module design, specifically designed for audio device developers and Hi-Fi DIY enthusiasts.",
|
||||
"brand": {
|
||||
"@type": "Brand",
|
||||
"name": "Phaten Audio"
|
||||
@@ -42,9 +42,9 @@ __USB TO I2S HiFi Audio Converter Evaluation Board__
|
||||
|
||||
{align=right width=400}
|
||||
|
||||
- A316-HF-I2S-V1 is based on the A316-Mini--V1 XU316 module design, **DAC removed**, focused on **USB digital signal reception and conversion**
|
||||
- All XU316 pins are accessible on the evaluation board, allowing users to perform various development and debugging tasks with the XU316 based on this evaluation board
|
||||
- Combined with different DACs, users can use this evaluation board for evaluating various USB HiFi applications, suitable for audio device developers and Hi-Fi DIY enthusiasts building high-fidelity audio decoding systems
|
||||
- A316-HF-I2S-V1 is based on the A316-Mini--V1 XU316 module design, with **DAC removed**, focusing on **USB digital signal reception and conversion**
|
||||
- All XU316 pins are broken out on the evaluation board, allowing users to perform various development and debugging tasks for XU316 based on this evaluation board
|
||||
- Combined with different DACs, users can utilize this evaluation board for evaluating various USB HiFi applications, suitable for audio device developers and Hi-Fi DIY enthusiasts to build high-fidelity audio decoding systems
|
||||
|
||||
|
||||
|
||||
@@ -55,14 +55,14 @@ __USB TO I2S HiFi Audio Converter Evaluation Board__
|
||||
|
||||
=== "Key Features"
|
||||
- Full support for 768kHz/DSD512 audio input and output sample rates
|
||||
- Supports MQA
|
||||
- Supports optical/coaxial input
|
||||
- MQA support
|
||||
- Optical/coaxial input support
|
||||
|
||||
=== "Technical Documentation"
|
||||
|
||||
| Type | Title | Download |
|
||||
|:--------:|:------------------------|:------------------------|
|
||||
| User Manual | [:material-file-document-outline: A316-HF-I2S-V1 Datasheet](./datasheet.md) | |
|
||||
| User Guide | [:material-file-document-outline: A316-HF-I2S-V1 Datasheet](./datasheet.md) | |
|
||||
| Product Configuration Protocol | [:material-file-document-outline: XU316 USB HiFi Decoder Standard Product Configuration Protocol](../../protocols/xu316_zerocode_protocol.md) | [:material-download:] |
|
||||
|
||||
=== "Firmware List"
|
||||
@@ -91,7 +91,7 @@ __USB TO I2S HiFi Audio Converter Evaluation Board__
|
||||
|
||||
</div>
|
||||
|
||||
## Inquiries and Feedback
|
||||
## Inquiry and Feedback
|
||||
<details>
|
||||
<summary>Click to expand inquiry and feedback form</summary>
|
||||
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
---
|
||||
title: A316-LS-MIC-V2 USB AI Live Streaming Microphone EVB
|
||||
description: A316-LS-MIC-V2 is a professional USB AI live streaming microphone evaluation board supporting 192KHz/24bit high-definition audio sampling with built-in AI noise reduction algorithm and comprehensive audio effects processing system for professional live streaming users.
|
||||
keywords: USB AI microphone, live streaming microphone, AI noise reduction, high-definition audio sampling, audio effects processing, XU316 chip
|
||||
title: A316-LS-MIC-V2 USB AI Live Streaming Microphone Evaluation Board
|
||||
description: A316-LS-MIC-V2 is a professional USB AI live streaming microphone evaluation board supporting 192KHz/24bit high-definition audio sampling, built-in AI noise reduction algorithm, equipped with comprehensive audio effect processing system, providing high-quality recording experience for professional live streaming users.
|
||||
keywords: USB AI microphone, live streaming microphone, AI noise reduction, high-definition audio sampling, audio effect processing, XU316 chip
|
||||
hide:
|
||||
-toc
|
||||
login: true
|
||||
@@ -13,7 +13,7 @@ login: true
|
||||
"@context": "https://schema.org",
|
||||
"@type": "Product",
|
||||
"name": "A316-LS-MIC-V2 USB AI Live Streaming Microphone Evaluation Board",
|
||||
"description": "A316-LS-MIC-V2 is a professional USB AI live streaming microphone evaluation board supporting 192KHz/24bit high-definition audio sampling with built-in AI noise reduction algorithm and comprehensive audio effects processing system for professional live streaming users.",
|
||||
"description": "A316-LS-MIC-V2 is a professional USB AI live streaming microphone evaluation board supporting 192KHz/24bit high-definition audio sampling, built-in AI noise reduction algorithm, equipped with comprehensive audio effect processing system, providing high-quality recording experience for professional live streaming users.",
|
||||
"brand": {
|
||||
"@type": "Brand",
|
||||
"name": "Phaten Audio"
|
||||
@@ -32,7 +32,7 @@ login: true
|
||||
<div class="card-wide" markdown>
|
||||
|
||||
# A316-LS-MIC-V2
|
||||
__USB Live Streaming Microphone Evaluation Board with AI Noise Reduction__
|
||||
__USB AI Live Streaming Microphone Evaluation Board with AI Noise Reduction__
|
||||
|
||||
</div>
|
||||
</div>
|
||||
@@ -42,9 +42,9 @@ __USB Live Streaming Microphone Evaluation Board with AI Noise Reduction__
|
||||
|
||||
{align=right width=400}
|
||||
|
||||
- A316-LS-MIC-V2 is a large-format (70x150mm) USB AI live streaming microphone evaluation board featuring XU316 chip design, providing superior recording experience for professional live streaming users.
|
||||
- The evaluation board supports high-definition audio sampling with built-in AI noise reduction algorithm that effectively filters environmental noise while maintaining vocal clarity.
|
||||
- Equipped with comprehensive audio effects processing system including Compressor, Reverb effects, and 8-band EQ adjustment.
|
||||
- A316-LS-MIC-V2 is a large-size (70x150mm) USB AI live streaming microphone evaluation board using XU316 chip design, providing better recording experience for professional live streaming users
|
||||
- The evaluation board supports high-definition audio sampling, built-in AI noise reduction algorithm, effectively filtering environmental noise while maintaining voice clarity
|
||||
- Equipped with comprehensive audio effect processing system, including Compressor, Reverb effects, and 8-band EQ adjustment
|
||||
<br>
|
||||
<br>
|
||||
[:shopping_cart: Purchase Sample](https://detail.1688.com/offer/915688698243.html?_t=1747013479504&spm=a2615.7691456.co_1_0_wangpu_score_0_0_0_0_0_0_0000_0.0){.md-button }
|
||||
@@ -56,25 +56,25 @@ __USB Live Streaming Microphone Evaluation Board with AI Noise Reduction__
|
||||
=== "Key Features"
|
||||
- Supports 48KHz-192KHz/24bit high-definition audio sampling
|
||||
- SNR>101dB
|
||||
- Intelligent AI noise reduction effectively filters background noise
|
||||
- Comprehensive audio effects processing system (Limiter/Compressor/Reverb/10-band EQ)
|
||||
- Intelligent AI noise reduction function, effectively filters background noise
|
||||
- Comprehensive audio effect processing system (Limiter/Compressor/Reverb/10-band EQ)
|
||||
- Automatic gain control function
|
||||
- USB Type-C interface, 3.5mm headphone and microphone jacks, macaron wired microphone interface
|
||||
- RGB dynamic lighting effects (static/dynamic/music responsive)
|
||||
- USB Type-C interface, 3.5mm headphone and microphone interfaces, XLR wired microphone interface
|
||||
- RGB dynamic lighting effects (static/dynamic/music rhythm)
|
||||
|
||||
=== "Technical Documentation"
|
||||
|
||||
| Type | Title | Download |
|
||||
|:--------:|:------------------------|:------------------------|
|
||||
| User Manual | [:material-file-document-outline: A316-LS-MIC-V2 User Guide](./user_guide.md) | |
|
||||
| AI Noise Reduction Performance | [:material-file-document-outline: A316-LS-MIC-V2 Noise Reduction Effects](./dnr_effect.md) | |
|
||||
| Datasheet | [:material-file-document-outline: A316-CODEC-V1 USB AI Noise Reduction Microphone Module Datasheet](../../datasheet/modules/a316_codec_v1_datasheet.md) | |
|
||||
| AI Noise Reduction Effect | [:material-file-document-outline: A316-LS-MIC-V2 Noise Reduction Effect](./dnr_effect.md) | |
|
||||
| Product Datasheet | [:material-file-document-outline: A316-CODEC-V1 USB AI Noise Reduction Microphone Module Datasheet](../../datasheet/modules/a316_codec_v1_datasheet.md) | |
|
||||
|
||||
|
||||
=== "Firmware List"
|
||||
| Firmware Name | Firmware Version | Release Date | Firmware Description | Download |
|
||||
|:--------------------|:------------------------------------|:----------------|:--------------------|:--------------------|
|
||||
| USB AI Microphone Default Firmware | 1.0.0 | July 14, 2025 | Stereo, recording and playback capable. Compatible with desktop debug software (250617) | <a href="javascript:void(0);" onclick="checkLogin('/assets/download/firmware/xmos_evb_standard_bin/mic_v2_reverb/factory_mic_v2_6001.bin')">:material-download:</a> |
|
||||
| USB AI Microphone Default Firmware | 1.0.0 | 2025-07-14 | Stereo, recording and playback capable. Compatible with desktop debug software (250617) | <a href="javascript:void(0);" onclick="checkLogin('/assets/download/firmware/xmos_evb_standard_bin/mic_v2_reverb/factory_mic_v2_6001.bin')">:material-download:</a> |
|
||||
|
||||
|
||||
|
||||
@@ -82,13 +82,13 @@ __USB Live Streaming Microphone Evaluation Board with AI Noise Reduction__
|
||||
|
||||
| Type | Description | Download |
|
||||
|:--------:|:------------------------|:------------------------|
|
||||
| Debug Tools | AI Microphone Debug Tools |[:material-toolbox: Debug Tools](../../../services_support/tools_software/index.md) |
|
||||
| Debug Tools | AI Microphone Debug Tool |[:material-toolbox: Debug Tools](../../../services_support/tools_software/index.md) |
|
||||
|
||||
|
||||
## Supported Products
|
||||
<div class="grid cards" markdown>
|
||||
|
||||
- :material-developer-board: __USB Live Streaming Microphone Evaluation Board with AI Noise Reduction__
|
||||
- :material-developer-board: __USB AI Live Streaming Microphone Evaluation Board with AI Noise Reduction__
|
||||
|
||||
---
|
||||
|
||||
|
||||
@@ -5,7 +5,7 @@ status: new
|
||||
|
||||
# OT82111_VC1 Firmware Test Guide
|
||||
|
||||
## I. Block Diagram Overview
|
||||
## 1. Block Diagram Introduction
|
||||
|
||||
<div class="result" markdown>
|
||||
This guide introduces the test methods and related instructions for OT82111_VC1 firmware on the A316-LS-MIC-V2 evaluation board.{ width=450}
|
||||
@@ -13,11 +13,11 @@ This guide introduces the test methods and related instructions for OT82111_VC1
|
||||
|
||||
---
|
||||
|
||||
## II. A316-LS-MIC-V2 Default Input and A316 Output
|
||||
## 2. A316-LS-MIC-V2 Default Input and A316 Output
|
||||
|
||||
- A316-LS-MIC-V2 default input to A316 is fixed at 24-bit 48KHz.
|
||||
- Regardless of the sample rate selected during recording, when the USB device outputs to the 3.5mm audio interface (headphone test), the audio will be converted to 24-bit 48KHz for playback.
|
||||
- The audio format output from the USB device to the playback device is 24-bit 48KHz and cannot be changed.
|
||||
- A316-LS-MIC-V2 default input to A316 is fixed at 24-bit 48KHz
|
||||
- Regardless of the sampling rate selected during recording, when the USB device outputs to the 3.5mm audio interface (headphone test), the audio will be converted to 24-bit 48KHz for playback
|
||||
- USB device output to playback device audio format is 24-bit 48KHz and cannot be changed
|
||||
|
||||
|
||||
|
||||
@@ -25,21 +25,21 @@ This guide introduces the test methods and related instructions for OT82111_VC1
|
||||
|
||||
---
|
||||
|
||||
## III. I2S Output Sample Rate Acquisition and Switching
|
||||
## 3. I2S Output Sampling Rate Acquisition and Switching
|
||||
|
||||
The A316-LS-MIC-V2 evaluation board supports switching between different input sample rates via buttons, with audio output normally through the 3.5mm interface (headphone test).
|
||||
Switchable sample rates include: 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz.
|
||||
For precise sample rate measurement, use a logic analyzer to capture waveforms (actual measurements may have some margin of error).
|
||||
The A316-LS-MIC-V2 evaluation board supports switching between different input sampling rates via button, and audio will be output normally through the 3.5mm interface (headphone test).
|
||||
Switchable sampling rates include: 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz.
|
||||
For precise sampling rate measurement, a logic analyzer can be used to capture waveforms (actual measurement may have some error).
|
||||
|
||||
### 1. Sample Rate Switching Button Location
|
||||
### 1. Button Location for Switching Sampling Rates
|
||||
|
||||
|
||||
|
||||
|
||||
### 2. A316-LS-MIC-V2 Waveform Capture Wiring Method
|
||||
### 2. A316-LS-MIC-V2 Waveform Capture Connection Method
|
||||
|
||||
|
||||
|
||||
|
||||
### 3. Recording and Waveforms at Different Sample Rates (All 24bit)
|
||||
### 3. Recording and Waveforms at Different Sampling Rates (All 24-bit)
|
||||
|
||||
- **44.1KHz:**
|
||||
|
||||
|
||||
@@ -1,33 +1,33 @@
|
||||
--8<-- "common/phaten_xmos_support_img.md"
|
||||
|
||||
# AI Noise Reduction Microphone
|
||||
## I. **Control Precautions**
|
||||
1. Before powering on a new board, connect an ammeter to check if the overall current is normal to prevent excessive current from damaging the chip.
|
||||
## 1. **Control Precautions**
|
||||
1. Before powering on a new board, connect an ammeter to check if the system current is normal to avoid burning the chip due to high current.
|
||||
|
||||
2. The MIC-A and MIC-B switches for testing microphone audio channels can only be switched alternately. Enabling both simultaneously will cause reduced volume.
|
||||
2. MIC-A and MIC-B channel microphone audio switches can only be alternately switched for testing. Opening both simultaneously will cause the volume to decrease.
|
||||
|
||||
{width="200" }
|
||||
|
||||
!!! warning "3. Important Note"
|
||||
!!! warning "3. Important"
|
||||
|
||||
When connecting a dynamic microphone to the XLR channel, turn off the +48V switch to prevent damage to the microphone.
|
||||
For XLR channel connected to dynamic microphones, turn off the +48V switch to avoid damaging the microphone.
|
||||
|
||||
4. The 10dB, 20dB, and 30dB switches should be enabled alternately according to the marked gain value. Only one marked switch can be enabled at a time; the other two must be disabled. For example, if enabling 10dB, the other two must be disabled.
|
||||
4. The 10dB, 20dB, 30dB switches operate alternately to enable the corresponding gain value. Only one switch can be enabled at a time, the other two must be closed. For example, when enabling 10dB, the other two must be closed.
|
||||
|
||||
{width="400" }
|
||||
|
||||
5. The white power indicator light next to the USB port is too bright and glaring. The resistor can be changed to 1.2-1.5K.
|
||||
5. The white power indicator LED next to the USB is too bright. The resistor can be changed to 1.2-1.5K to reduce brightness.
|
||||
|
||||
{width="400"}
|
||||
|
||||
[//]: # ({width="400" style="transform: rotate(90deg);margin-left:150px;"})
|
||||
## II. Button Description
|
||||
## 2. Button Description
|
||||
|
||||
{width="500" }
|
||||
|
||||
## III. PC Control Software Usage
|
||||
## 3. PC Control Software Usage
|
||||
|
||||
Configure the required scenario settings in the software. After opening, an operation interface and a log display cmd window will appear.
|
||||
The software can be used to configure the required scenarios. After opening, there will be an operation interface and a log display cmd window.
|
||||
|
||||
|
||||
|
||||
@@ -42,11 +42,11 @@ Configure the required scenario settings in the software. After opening, an oper
|
||||
- {width="400" }
|
||||
|
||||
</div>
|
||||
After adjusting settings, click "Load" in the lower left corner to apply changes to the device. If settings are applied successfully, log output will be displayed.
|
||||
After adjusting the settings, click "Load" at the bottom left to apply the changes to the device. If the settings are successful, logs will be printed.
|
||||
|
||||
|
||||
|
||||
After configuring settings, if you need to save them, click "Save".
|
||||
After configuration, if you need to save the settings, click "Save".
|
||||
|
||||
## Inquiries and Feedback
|
||||
<details>
|
||||
|
||||
135
en/docs/dev_doc/evb/a316_ph_dac_v1/v71_game_play_guide.md
Normal file
135
en/docs/dev_doc/evb/a316_ph_dac_v1/v71_game_play_guide.md
Normal file
@@ -0,0 +1,135 @@
|
||||
---
|
||||
title: True Hardcore 7.1 Spatial Audio Gaming Experience Guide
|
||||
login: true
|
||||
---
|
||||
|
||||
--8<-- "common/phaten_xmos_support_img.md"
|
||||
|
||||
<div class="grid" markdown>
|
||||
<div class="card-wide" markdown>
|
||||
|
||||
# True Hardcore 7.1 Spatial Audio Gaming Experience Guide
|
||||
</div>
|
||||
</div>
|
||||
|
||||
|
||||
## 1. Game Mode Description
|
||||
|
||||
### 1.1 Game Mode RGB Indicator LED Definition
|
||||
|
||||
| Game Audio Effect | Sample Rate | LED Color (Low Impedance Mode) | LED Color (High Impedance Mode) |
|
||||
|:-------------|:-------|:------------------|:------------------|
|
||||
| No Effect | -- | <span style="color: yellow;">●</span>Yellow solid | <span style="color: yellow;">●</span>Yellow blinking|
|
||||
| FPS | -- | <span style="color: cyan;">●</span>Cyan solid | <span style="color: cyan;">●</span>Cyan blinking |
|
||||
| True Hardcore 7.1 Spatial Audio | -- | <span style="color: magenta;">●</span>Magenta solid | <span style="color: magenta;">●</span>Magenta blinking |
|
||||
|
||||
|
||||
|
||||
### 1.2 How to Switch Device to Game Mode
|
||||
|
||||
- By default, after power-on the device operates in UAC2.0 HiFi music mode. Manual configuration can make the device operate in UAC1.0 game mode after power-on.
|
||||
|
||||
- During device operation, UAC mode cannot be switched.
|
||||
|
||||
- Method to operate device in game mode:
|
||||
1. With the device disconnected (powered off)
|
||||
2. Press and hold any button, then connect the device to the host (computer, smartphone, game console) USB port (to power on the device)
|
||||
3. Release the button when the indicator LED changes to game mode color
|
||||
4. The device will operate in game mode.
|
||||
|
||||
### 1.3 Game Audio Effect Description
|
||||
|
||||
- When the device operates in game mode, it has multiple selectable game audio effects with power-off memory function.
|
||||
|
||||
- Game audio effect description:
|
||||
|
||||
| Game Audio Effect | Game Audio Effect Description |
|
||||
|:-----------|:-----------|
|
||||
| No Effect | Original game audio output |
|
||||
| FPS | For shooter games, enhances footsteps and gunshots in the game |
|
||||
| True Hardcore 7.1 Spatial Audio | For games with multi-channel output, the device synthesizes the game's multi-channel audio into 2-channel audio through a 7.1 spatial audio algorithm, giving 2-channel audio 3D spatial awareness of direction and distance |
|
||||
|
||||
- Switching game audio effect
|
||||
- When the device operates in game mode, press and hold button 1 (Volume+) and button 2 (Volume-) simultaneously for more than 1 second (long press combination) to switch game audio effect once, cycling in the order listed in the table above.
|
||||
|
||||
|
||||
## 2. Windows Partial Multi-channel Game Support Settings
|
||||
|
||||
!!! info ""
|
||||
- Currently most PC games do not indicate multi-channel support on store pages. Players are advised to check gaming communities or test by opening games themselves
|
||||
- Most console-to-PC ported games support native 7.1 and require no in-game settings
|
||||
- Check if your device is set to surround sound in Windows. Some games cannot enable multi-channel output without detecting the device
|
||||
|
||||
### 2.1 Battlefield 2042
|
||||
|
||||
!!! info ""
|
||||
- Through 7.1 channel dynamic battlefield environment simulation, explosion sounds, drone buzzing, and sand storm roaring come from different directions, combined with dynamic weather system environmental sound effects to construct a three-dimensional battlefield spatial sense
|
||||
- Enable surround sound: **Battlefield 2042: Click options in lower left corner of main page, select sound, switch sound settings to surround sound**
|
||||
|
||||
<figure markdown="span">
|
||||
{width="800"}
|
||||
<figcaption></figcaption>
|
||||
</figure>
|
||||
<figure markdown="span">
|
||||
{width="800"}
|
||||
<figcaption></figcaption>
|
||||
</figure>
|
||||
|
||||
### 2.2 Call of Duty: Black Ops 6
|
||||
!!! info ""
|
||||
- **Uses Project Acoustics physical sound engine to achieve precise positioning of bullets passing by the ear, footsteps and weapon reload sounds present realistic spatial attenuation through walls in multi-channel**
|
||||
- Enable surround sound: **Call of Duty: Black Ops 6: Click gear in upper right corner of main page, select audio, switch speaker output to 7.1 surround**
|
||||
|
||||
<figure markdown="span">
|
||||
{width="800"}
|
||||
<figcaption></figcaption>
|
||||
</figure>
|
||||
<figure markdown="span">
|
||||
{width="800"}
|
||||
<figcaption></figcaption>
|
||||
</figure>
|
||||
|
||||
### 2.3 Delta Force
|
||||
!!! info ""
|
||||
- **Delta Force: Click gear in upper right corner, select audio, turn off HRTF, enable multi-channel output**
|
||||
- Enable surround sound: **Call of Duty: Black Ops 6: Click gear in upper right corner of main page, select audio, switch speaker output to 7.1 surround**
|
||||
|
||||
<figure markdown="span">
|
||||
{width="800"}
|
||||
<figcaption></figcaption>
|
||||
</figure>
|
||||
<figure markdown="span">
|
||||
{width="800"}
|
||||
<figcaption></figcaption>
|
||||
</figure>
|
||||
|
||||
|
||||
### 2.4 Forza Horizon 5
|
||||
!!! info ""
|
||||
- **Uses dynamic multi-channel rendering for Mexican rainforest environmental soundscape, engine roar in 7.1 channels distributed according to speed changes, mud tire friction and rainforest birdsong create immersive atmosphere through rear surround**
|
||||
- Enable surround sound: **Forza Horizon 5 automatically adjusts based on system output. When Windows output is 7.1, game automatically switches to 7.1 output. Players need not adjust any in-game settings**
|
||||
|
||||
<figure markdown="span">
|
||||
{width="800"}
|
||||
<figcaption></figcaption>
|
||||
</figure>
|
||||
|
||||
|
||||
### 2.5 Devil May Cry 5
|
||||
!!! info ""
|
||||
- **RE Engine supports 7.1 channel dynamic surround. Nero's greatsword heavy strike sounds roar from the front, Dante's dual pistol shots echo alternately in left and right channels, devil trigger skill release low-frequency vibrations transmitted through subwoofer, battle sound effects and rock BGM form multi-dimensional auditory impact**
|
||||
- Enable surround sound: **Devil May Cry 5 automatically adjusts based on system output. When Windows output is 7.1, game automatically switches to 7.1 output. Players need not adjust any in-game settings**
|
||||
|
||||
<figure markdown="span">
|
||||
{width="800"}
|
||||
<figcaption></figcaption>
|
||||
</figure>
|
||||
|
||||
|
||||
|
||||
|
||||
## 3. Revision History
|
||||
|
||||
| Version | Date | Description | Revised By |
|
||||
|:------|:-------------|:---------------------------------------|:-------------|
|
||||
| V1.0 | 2025-10-29 | Initial release | |
|
||||
@@ -1,5 +1,5 @@
|
||||
---
|
||||
title: XMOS AI Development Evaluation Board Resources
|
||||
title: XMOS AI Evaluation Board Resources
|
||||
hide:
|
||||
-toc
|
||||
---
|
||||
@@ -8,7 +8,7 @@ hide:
|
||||
<div class="grid" markdown>
|
||||
<div class="card-wide" markdown>
|
||||
|
||||
# Development Evaluation Boards
|
||||
# Evaluation Boards
|
||||
|
||||
|
||||
|
||||
@@ -27,3 +27,4 @@ hide:
|
||||
- [A316-V71-Game-V1](./a316_v71_game_v1/index.md)
|
||||
|
||||
</div>
|
||||
|
||||
|
||||
140
en/docs/dev_doc/evb/wifi_8711_speaker/RTL8711dev_board.md
Normal file
140
en/docs/dev_doc/evb/wifi_8711_speaker/RTL8711dev_board.md
Normal file
@@ -0,0 +1,140 @@
|
||||
---
|
||||
title: WiFi-Audio-TRX-V1 Development Evaluation Board Datasheet
|
||||
description: WiFi-Audio-TRX-V1 development evaluation board appearance dimensions, feature parameters, application scenarios, pin definitions and schematic descriptions, with unified image styling for improved readability.
|
||||
keywords: WiFi-Audio-TRX-V1, RTL8711, development evaluation board, appearance dimensions, features, pin definitions, schematics
|
||||
---
|
||||
|
||||
# WiFi-Audio-TRX-V1 Development Evaluation Board Datasheet
|
||||
|
||||
## Product Overview
|
||||
|
||||
WiFi-Audio-TRX-V1 features rich functionality and excellent performance, suitable for various IoT application scenarios. The module integrates a high-performance MCU, dual-band WiFi and Bluetooth functionality to meet different device communication needs. Its internal structure is well-designed, providing stable power supply to each module through embedded regulators, while featuring multiple power management modes to reduce power consumption. Rich interface resources enable convenient connection and communication with external devices such as sensors and displays. In terms of RF performance, both WiFi and Bluetooth provide reliable wireless connections, ensuring stability and efficiency of data transmission. The module has broad application prospects in smart home, industrial IoT, smart wearable devices and other fields, providing powerful wireless communication capabilities and data processing capabilities for various smart devices, facilitating intelligent control and data interaction.
|
||||
|
||||
|
||||
## Appearance Dimensions
|
||||
|
||||
### Product Images
|
||||
**Front**
|
||||
|
||||
{ width="60%" }
|
||||
|
||||
**Back**
|
||||
|
||||
{ width="60%" }
|
||||
|
||||
|
||||
### Product Dimensions
|
||||
|
||||
**_Length: 65mm; Width: 30mm_**
|
||||
|
||||
## Features
|
||||
|
||||
- **Support Dual-band WiFi and Bluetooth**: Supports WLAN dual-band (2.4GHz and 5GHz) and Bluetooth Low Energy 5.0, integrating Real-M300 high-performance MCU, WLAN MAC, baseband, RF and Bluetooth functions, enabling complete Wi-Fi and BLE 5.0 protocol functionality.
|
||||
- **Multiple Operating Modes and Energy-Saving Mechanisms**: Operating voltage range 3.0V - 3.6V, supporting multiple low-power modes such as sleep mode and deep sleep mode. In different modes, various functional modules can flexibly configure power and clock to reduce power consumption. For example, in sleep mode, most functional modules can perform power gating or clock gating; in deep sleep mode, all functions except AON are disabled to achieve ultra-low power consumption.
|
||||
- **Rich Interface Resources**: Provides configurable GPIO ports for convenient control of peripheral devices; integrates internal memory, supporting simple application development; features multiple communication interfaces such as UART, SPI, QSPI/OSPI, I2C, etc., and also provides high-speed connection interfaces SDIO and USB, as well as audio functionality (including digital microphone interface and I2S).
|
||||
- **High-Performance Processor**: Built-in low-power KM4 MCU (based on Armv8.1-M architecture, compatible with Cortex-M55 instruction set), with a main frequency up to 345MHz, featuring enhanced debugging capabilities, floating-point computing, digital signal processing extension instructions and other features; also includes low-power KM0 MCU (based on Armv8-M baseline architecture, compatible with Cortex-M23 instruction set), with a main frequency up to 115MHz, simple instruction set, small code size, compatible with KM4 processor code and tools, suitable for power-sensitive fast response operations such as power management and network protocol processing.
|
||||
- **Reliable RF Performance**
|
||||
|
||||
- **WiFi RF Characteristics**: In the 2.4GHz band, complies with IEEE 802.11b/g/n standards, supports multiple modulation methods and transmission rates, with good transmit power and receive sensitivity performance; in the 5GHz band, complies with IEEE 802.11a/n standards, also featuring excellent transmit and receive performance, and antenna diversity functionality, which can select the best antenna through external RF switch to reduce channel fading effects, while using real-time calibration mechanisms to ensure stable operation of the radio system.
|
||||
- **Bluetooth RF Characteristics**: Complies with Bluetooth 5.0 specifications, operates in the 2.4GHz band, with transmit power and receive sensitivity meeting relevant standards, supporting multiple Bluetooth functions such as fast AGC control, multiple power levels, enhanced power control and low-power mode (such as BLE).
|
||||
|
||||
|
||||
|
||||
## Application Scenarios
|
||||
|
||||
* Smart Home (lighting control, switches and plugs, home appliances, etc.)
|
||||
* Industry 4.0
|
||||
* Low-power IoT devices (low-power Wi-Fi cameras, smart locks, etc.)
|
||||
* Smart wearable devices
|
||||
* Portable devices
|
||||
* Gaming accessories
|
||||
* Wireless audio devices
|
||||
* Smart interactive toys, etc.
|
||||
|
||||
## Main Parameters
|
||||
|
||||
**Electrical Parameters**
|
||||
|
||||
* Operating Voltage: 3.0V - 3.6V.
|
||||
* Operating Temperature: -30℃ to 85℃.
|
||||
* Storage Temperature: -40℃ to 125℃.
|
||||
|
||||
**RF Parameters**
|
||||
|
||||
WiFi (2.4GHz)
|
||||
|
||||
* Transmit Power: 802.11b@11Mbps up to 18dBm; 802.11g@54Mbps up to 17dBm; 802.11n@N20 MCS7 up to 16dBm; 802.11n@N40_MCS7 up to 16dBm.
|
||||
* Receive Sensitivity: 802.11b@11Mbps up to -85dBm; 802.11g@54Mbps up to -73dBm; 802.11n@N20 MCS7 up to -68dBm; 802.11n@N40 MCS7 up to -65dBm.
|
||||
|
||||
WiFi (5GHz)
|
||||
|
||||
* Transmit Power: 802.11a@54Mbps up to 13dBm; 802.11n@N20_MCS7 up to 12dBm; 802.11n@N40_MCS7 up to 12dBm.
|
||||
* Receive Sensitivity: 802.11a@54Mbps, 802.11n@N20 MCS7, 802.11n@N40 MCS7 related parameters not detailed (refer to subsequent sections of documentation or actual product detailed specifications).
|
||||
|
||||
**Bluetooth**
|
||||
|
||||
* Transmit Power: 0 - 10dBm (BLE, GPSK/1Mbps and GPSK/2Mbps).
|
||||
* Receive Sensitivity: ≤ -95dB (Sensitivity LE1M@PER<30.8%); ≤ -93dB (Sensitivity LE2M@PER<30.8%).
|
||||
|
||||
|
||||
|
||||
## Pin Definition
|
||||
|
||||
| Pin Number | Name | Function Description |
|
||||
|------|-------|-------------------------------------------------------------------------------|
|
||||
| 1 | VD33 | 3.3V power supply |
|
||||
| 2 | VD5V | 5V power supply |
|
||||
| 3 | PB30 | Wake pin. This pin should remain pulled up during reset. Default function is general purpose input/output and can be configured for other functions |
|
||||
| 4 | VD5V | 5V power supply |
|
||||
| 5 | PB31 | Wake pin. IC operating mode is determined by level of trap pin PB31/TM_DIS during power-on. 1: Normal mode 0: Test mode Default function is general purpose input/output and can be configured for other functions |
|
||||
| 6 | PB_2 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 7 | PA12 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 8 | PB_2 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 9 | PA_28 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 10 | PB_3 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 11 | PA_28 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 12 | PB_15 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 13 | PB7 | Power input to digital I/O power domain |
|
||||
| 14 | PB_15 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 15 | PB9 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 16 | PB8 | Power input to digital I/O power domain |
|
||||
| 17 | VD33 | 3.3V power supply |
|
||||
| 18 | PB13 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 19 | PA23 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 20 | PB14 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 21 | PA_20 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 22 | PB14 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 23 | PA_30 | Default function is SWD CLK, can be configured for other functions after IC boot |
|
||||
| 24 | PA_21 | Power input to digital I/O power domain. Default function is general purpose input/output and can be configured for other functions |
|
||||
| 25 | PB_0 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 26 | PA22 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 27 | PB0 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 28 | PB_15 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 29 | PA_29 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 30 | PB_21 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 31 | PB_18 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 32 | PB_21 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 33 | PB_19 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 34 | PB_22 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 35 | PB20 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 36 | PB_22 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 37 | PB6 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 38 | PB_22 | Default function is general purpose input/output and can be configured for other functions |
|
||||
| 39 | GND | Ground |
|
||||
| 40 | GND | Ground |
|
||||
|
||||
|
||||
|
||||
## Schematics
|
||||
|
||||
{ width="80%" }
|
||||
|
||||
|
||||
## Contact & Feedback
|
||||
|
||||
<details>
|
||||
<summary>Click to expand contact & feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
</details>
|
||||
26
en/docs/dev_doc/evb/wifi_8711_speaker/design_docs.md
Normal file
26
en/docs/dev_doc/evb/wifi_8711_speaker/design_docs.md
Normal file
@@ -0,0 +1,26 @@
|
||||
---
|
||||
title: WiFi-Audio-TRX-V1 Wi-Fi Audio Evaluation Board Design Documents
|
||||
hide:
|
||||
- toc
|
||||
login: true
|
||||
description: Phaten Audio WiFi-Audio-TRX-V1 Wi-Fi audio evaluation board design resources based on Realtek RTL8711, including schematics, BOM, and component specifications.
|
||||
keywords: Phaten Audio, WiFi-Audio-TRX-V1, RTL8711, Wi-Fi audio, evaluation board, design documents, schematics, BOM
|
||||
---
|
||||
|
||||
# WiFi-Audio-TRX-V1 Wi-Fi Audio Evaluation Board Design Documents
|
||||
|
||||
--8<-- "common/phaten_xmos_support_img.md"
|
||||
--8<-- "common/checklogin_form.md"
|
||||
|
||||
| Type | Title | Download |
|
||||
| :----------------: | :------------------------------------------------------------------ | :---------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
||||
| Module Datasheet for Evaluation Board | :material-file-document-outline: WiFi-Audio-TRX-V1 Module Datasheet | <a href="javascript:void(0);" onclick="checkLogin('/assets/download/factory_img/wifi_audio_trx/WB30D-1711DCMV1 模组规格书(1).pdf')"> :material-download: </a> |
|
||||
| Evaluation Board Schematics | :material-file-document-outline: WiFi-Audio-TRX-V1 Schematics | <a href="javascript:void(0);" onclick="checkLogin('/assets/download/factory_img/wifi_audio_trx/8711evb原理图.pdf')"> :material-download: </a> |
|
||||
|
||||
## Contact & Feedback
|
||||
<details>
|
||||
<summary>Click to expand contact & feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
</details>
|
||||
59
en/docs/dev_doc/evb/wifi_8711_speaker/firmware_flashing.md
Normal file
59
en/docs/dev_doc/evb/wifi_8711_speaker/firmware_flashing.md
Normal file
@@ -0,0 +1,59 @@
|
||||
---
|
||||
login: true
|
||||
description: RTL8711/RTL8730 flashing tool and evaluation board flashing procedure, including steps and notes for entering flashing and print modes.
|
||||
keywords: RTL8711, RTL8730, flashing tool, WiFi-Audio-TRX-V1, evaluation board, download, firmware
|
||||
---
|
||||
|
||||
--8<-- "common/checklogin_form.md"
|
||||
|
||||
# WiFi-Audio-TRX-V1 Series Flashing Instructions
|
||||
This tool is the flashing tool for RTL8711Dx, supporting both 8711 and 8730.
|
||||
|
||||
## Preparation
|
||||
|
||||
Download Flashing Tool: <a href="javascript:void(0);" onclick="checkLogin('/assets/download/a316-8711-5.1make/ImageTool-调试烧录8711-8730工具.zip')">:material-download:</a>
|
||||
|
||||
### Module Entering Flashing Mode
|
||||
{width="48%"} {width="48%"}
|
||||
|
||||
### Evaluation Board Entering Flashing Mode
|
||||
First press and hold the download button, then press and hold the chip button. The serial port will print \0. Then release both buttons together.
|
||||
### Print Mode
|
||||
Press the chip button once to reset.
|
||||
|
||||
{width="65%"}
|
||||
|
||||
!!! note
|
||||
**The Type-C port to the right of the download button in the diagram is power-only. The rightmost Type-C port can be used for both power supply and serial port printing**
|
||||
|
||||
## Operation Steps
|
||||
### Step 1: Download the Tool and Double-Click to Open
|
||||
{width="70%"}
|
||||
|
||||
### Step 2: Open the Software, Click "File" → "Open" to Select File
|
||||
{width="70%"}
|
||||
|
||||
### Step 3: Select Configuration File
|
||||
Select "AmebaDplus FreeRTOS NOR.rdev" (the 3rd one) for 8711; the 6th one is for 8730, select as needed.
|
||||
{width="70%"}
|
||||
|
||||
### Step 4: Select Firmware to Flash
|
||||
Ensure the firmware name matches the configuration.
|
||||
{width="70%"}
|
||||
|
||||
### Step 5: Add VFS Files as Needed
|
||||
If you need to add additional VFS, please customize the file name, for example "vfs.bin".
|
||||
{width="60%"}
|
||||
|
||||
### Step 6: Select Serial Port and Baud Rate, Then Start Flashing
|
||||
Select the serial port and baud rate (usually auto-selected) as shown. After verification, click "Download" below to start flashing.
|
||||
{width="70%"}
|
||||
|
||||
## Contact & Feedback
|
||||
|
||||
<details>
|
||||
<summary>Click to expand contact & feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
</details>
|
||||
31
en/docs/dev_doc/evb/wifi_8711_speaker/index-chanpliebiao.md
Normal file
31
en/docs/dev_doc/evb/wifi_8711_speaker/index-chanpliebiao.md
Normal file
@@ -0,0 +1,31 @@
|
||||
---
|
||||
title: Wi-Fi Wireless Speaker Series Core Firmware
|
||||
hide:
|
||||
- toc
|
||||
---
|
||||
|
||||
--8<-- "common/phaten_xmos_support_img.md"
|
||||
|
||||
# Wi-Fi Wireless Speakers
|
||||
|
||||
!!! info "Product List"
|
||||
<div class="sticky-column" markdown>
|
||||
|
||||
| **Product (Features:material-arrow-down:)(Model:material-arrow-right:)** | [WB8711_ZW](./wb8711_zw.md) |
|
||||
|---------------------|---------------------|
|
||||
| **Wireless Specifications** | 2.4 / 5GHz Wi-Fi, BLE 5.0 |
|
||||
| **Configuration & Deployment** | ZeroConfig + Web Configuration Center |
|
||||
| **Application Scenarios** | Home Theater Wireless Audio/Smart Speakers |
|
||||
| **Reference Specifications** | [WB8711-ZW Module Specifications](../../dev_doc/wifi_speaker/wb8711_zw.md) |
|
||||
| **Status** | Active |
|
||||
|
||||
</div>
|
||||
|
||||
## Contact & Feedback
|
||||
|
||||
<details>
|
||||
<summary>Click to expand contact & feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
</details>
|
||||
136
en/docs/dev_doc/evb/wifi_8711_speaker/index.md
Normal file
136
en/docs/dev_doc/evb/wifi_8711_speaker/index.md
Normal file
@@ -0,0 +1,136 @@
|
||||
---
|
||||
title: WiFi-Audio-TRX-V1 Wi-Fi Audio Evaluation Board
|
||||
description: Wi-Fi wireless speaker evaluation board/firmware reference page based on Realtek RTL8711 platform, supporting ZeroConfig and Web configuration, compatible with 2.4/5.8GHz and BLE 5.0.
|
||||
keywords: Wi-Fi wireless speakers, RTL8711, ZeroConfig, Web configuration, BLE 5.0, evaluation board
|
||||
hide:
|
||||
- toc
|
||||
login: true
|
||||
---
|
||||
|
||||
<!-- Structured Data Markup (SEO) -->
|
||||
<script type="application/ld+json">
|
||||
{
|
||||
"@context": "https://schema.org",
|
||||
"@type": "Product",
|
||||
"name": "WiFi-Audio-TRX-V1 Wi-Fi Audio Evaluation Board",
|
||||
"description": "Wi-Fi wireless speaker evaluation board/firmware reference based on Realtek RTL8711 platform, supporting ZeroConfig and Web configuration, compatible with 2.4/5GHz and BLE 5.0.",
|
||||
"brand": {
|
||||
"@type": "Brand",
|
||||
"name": "Phaten Audio"
|
||||
}
|
||||
}
|
||||
</script>
|
||||
|
||||
--8<-- "common/checklogin_form.md"
|
||||
--8<-- "common/phaten_xmos_support_img.md"
|
||||
|
||||
<div class="grid" markdown>
|
||||
<div class="card-wide" markdown>
|
||||
|
||||
# WiFi-Audio-TRX-V1
|
||||
__Development-Free ZeroConfig + Web Configuration Wi-Fi Wireless Speaker Firmware (Realtek RTL8711Dx Platform)__
|
||||
|
||||
</div>
|
||||
</div>
|
||||
|
||||
<div class="result" markdown>
|
||||
{align=right width=400}
|
||||
WiFi-Audio-TRX-V1 is a customizable firmware for Wi-Fi wireless speakers and smart speakers, supporting out-of-the-box ZeroConfig workflow and Web configuration interface. Based on Realtek `RTL8711Dx` series modules, it supports 2.4 / 5.8GHz dual-band Wi-Fi and BLE 5.0, meeting high-reliability connection and convenient deployment requirements.
|
||||
|
||||
- ZeroConfig first power-on guidance, hotspot quick configuration for speaker channels
|
||||
- Built-in Web configuration center
|
||||
- Support configuration import/export, suitable for batch delivery
|
||||
|
||||
[:shopping_cart: Sample Purchase](){.md-button }
|
||||
|
||||
</div>
|
||||
|
||||
## Features and Documentation
|
||||
|
||||
=== "Key Features"
|
||||
- 5.8GHz Wi-Fi wireless audio link, low latency, strong anti-interference, stable and reliable (supports up to 10 channels transmission, depending on project configuration).
|
||||
- ZeroConfig first power-on guidance and Web visual configuration, supporting auto-reconnection.
|
||||
- Scenario-based channel configuration: standard 5.1, compact 3.1, minimalist 2.1, expandable to 7.1.2; flexible channel mapping and device grouping.
|
||||
|
||||
=== "Wireless Audio Transmission"
|
||||
- 5.8GHz Wi-Fi wireless transmission, up to 20 meters range, optimized audio link latency and jitter, supporting multi-point connection between host (Soundbar) and rear surround/subwoofer.
|
||||
- Multi-link collaboration and anti-interference strategy: automatic channel selection, reconnection and fault tolerance, adapted to complex environments.
|
||||
- BLE-based for fast pairing/auxiliary configuration (depending on hardware platform capabilities).
|
||||
|
||||
=== "Audio Specifications and Synchronization"
|
||||
- Support for multiple high-resolution audio formats: PCM default up to 192kHz/48bit.
|
||||
- Dynamic range optimization and buffer synchronization strategy, ensuring high fidelity and stable playback, reducing stuttering and desynchronization.
|
||||
- Support master-slave switching, playback latency 20ms.
|
||||
|
||||
=== "Channels and Roles"
|
||||
- Role definitions: Host (Soundbar/Master), Rear Surround (Rear L/R), Subwoofer (Sub), supporting custom extensions.
|
||||
- Channel mapping: Support intuitive assignment of channels to devices in Web configuration, adapted to different room layouts.
|
||||
- Device grouping and networking: Support group ID and auto-discovery, facilitating parallel deployment of multiple systems.
|
||||
|
||||
=== "Web Configuration"
|
||||
- Configuration center: Network (AP/STA), device pairing, channel mapping, channel test playback.
|
||||
|
||||
> The above hardware parameters and capabilities refer to the Realtek `RTL8711Dx` series module specifications, subject to actual model selection and datasheets.
|
||||
|
||||
=== "Technical Documentation"
|
||||
|
||||
| Type | Title | Link |
|
||||
| :----------: | :------------------------------------------------ | :-------------------------- |
|
||||
| User Guide | [:material-file-document-outline: User Guide] | [:material-open-in-new:](./user_guide.md) |
|
||||
| Web Configuration Guide | [:material-file-document-outline: Web Configuration Instructions] | [:material-open-in-new:](./web_config_guide.md) |
|
||||
| Firmware Flashing Instructions | [:material-file-document-outline: Firmware Flashing Steps] | [:material-open-in-new:](./firmware_flashing.md) |
|
||||
| Hardware Datasheet | [:material-file-document-outline: Hardware Datasheet] | [:material-open-in-new:](./RTL8711dev_board.md) |
|
||||
| Design Resources | [:material-file-document-outline: Design Resources] | [:material-open-in-new:](./design_docs.md) |
|
||||
|
||||
=== "Firmware List"
|
||||
| File Name | Firmware Version | Release Date | Firmware Description | Download |
|
||||
|:--------------------|:---------|:--------|:--------------------|:--------------------|
|
||||
| WiFi-Audio-TRX-V1 Factory Image | v1.0 | | Evaluation board factory image, base firmware | <a href="javascript:void(0);" onclick="checkLogin('/assets/download/factory_img/wifi_audio_trx/WiFi-Audio-TRX-V1.zip')">:material-download:</a> |
|
||||
| WiFi-Audio-TRX-V1 VFS Config Firmware | v1.0 | | Configuration firmware, needs to be flashed together with base firmware | <a href="javascript:void(0);" onclick="checkLogin('/assets/download/factory_img/wifi_audio_trx/VFS-config.zip')">:material-download:</a> |
|
||||
|
||||
=== "Tools and Software"
|
||||
|
||||
| Type | Description | Download |
|
||||
| :----------: | :---------------------- | :-------------------------------------------------------------------------------------------------------------------------------------- |
|
||||
| Debugging Tools | Debugging Tool Collection | [:material-toolbox: Tools & Software](../../../services_support/tools_software/index.md) |
|
||||
| Drivers | USB Driver | [:material-usb-flash-drive-outline: USB Driver](../../../services_support/driver/index.md) |
|
||||
|
||||
## Application Scenarios
|
||||
|
||||
- Multi-channel Home Theater Wireless Applications
|
||||
- Standard 5.1, compact 3.1, minimalist 2.1 channel configurations, expandable to 7.1.2
|
||||
- Support multi-point connection between host (Soundbar/Master) and rear surround/subwoofer
|
||||
|
||||
- Expandable Scenarios and Deployment
|
||||
- Rapid batch deployment in hotels, apartments, shopping centers and other public spaces
|
||||
- Network audio playback systems for homes and studios, parallel networking of multiple systems
|
||||
- Support device grouping, auto-discovery and channel mapping, adapted to different room layouts
|
||||
|
||||
## Ordering Information
|
||||
|
||||
| Product Name | Product Model | Product Image |
|
||||
| :----------------- | :-------- | :-------------------------------------------------------------------------------------------: |
|
||||
| Wi-Fi Wireless Development-Free Speaker Evaluation Board | WiFi-Audio-TRX-V1 | {align=center width=120} |
|
||||
|
||||
> Customized firmware (theme, feature tailoring, factory parameters) can be provided according to actual module/model.
|
||||
|
||||
<!-- ## Supported Products
|
||||
<div class="grid cards" markdown>
|
||||
|
||||
- :material-developer-board: __RTL8711 Series Wi-Fi Audio Evaluation Board and Firmware__
|
||||
|
||||
---
|
||||
|
||||
Provides network configuration and audio routing evaluation for quick verification of firmware capabilities (example).
|
||||
|
||||
[:octicons-arrow-right-24: View Product Page](../../../products/wifi_speaker/WiFi-Audio-TRX-V1.md)
|
||||
|
||||
</div> -->
|
||||
|
||||
## Contact & Feedback
|
||||
<details>
|
||||
<summary>Click to expand contact & feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
</details>
|
||||
46
en/docs/dev_doc/evb/wifi_8711_speaker/user_guide.md
Normal file
46
en/docs/dev_doc/evb/wifi_8711_speaker/user_guide.md
Normal file
@@ -0,0 +1,46 @@
|
||||
---
|
||||
title: WiFi-Audio-TRX-V1 User Guide
|
||||
description: WiFi-Audio-TRX-V1 evaluation board user guide, covering hardware preparation, button and LED soldering instructions, firmware flashing and Web configuration entry.
|
||||
keywords: WiFi-Audio-TRX-V1, RTL8711, evaluation board, user guide, firmware flashing, Web configuration
|
||||
---
|
||||
|
||||
# WiFi-Audio-TRX-V1 User Guide
|
||||
|
||||
Quick start and usage instructions for the WiFi-Audio-TRX-V1 evaluation board, including hardware preparation, TX button and LED soldering, firmware flashing and Web configuration entry.
|
||||
|
||||
## Hardware Device Preparation
|
||||
|
||||
### Evaluation Board
|
||||
|
||||
- [WiFi-Audio-TRX-V1 Evaluation Board](./index.md)
|
||||
|
||||
WiFi-Audio-TRX-V1 can be used as either a transmitter board or receiver board: uniformly named as TX for transmitter board and RX for receiver board.
|
||||
|
||||
!!! warning "Note"
|
||||
1. TX board needs to be used with RX board
|
||||
2. RX board does not include speakers, additional speakers need to be connected.
|
||||
3. TX board pin 28 connected to GND, keep for more than 2 seconds (serial port prints keyword: FTYWiFiSpeaker), then enter Web configuration mode.
|
||||
4. TX board has additional LED and button developed for debugging and configuration. (For details, please refer to [TX Transmitter Board Hardware Adjustment](./user_guide.md#tx))
|
||||
|
||||
### TX Transmitter Board Hardware Adjustment (Optional)
|
||||
|
||||
!!! note "Solder Additional Button and LED"
|
||||
1. `PB_17` pin connected to LED IO, LED in series with 1k resistor to `GND`
|
||||
2. Connect button one end to `GND` on the board
|
||||
3. `PB_1` connected to the other end of the button (`GND`)
|
||||
|
||||
{width="60%"}
|
||||
{width="45%"} {width="45%"}
|
||||
|
||||
## [Flash Firmware](./firmware_flashing.md)
|
||||
|
||||
## [Web Configuration and Firmware Function Verification](./web_config_guide.md)
|
||||
|
||||
## Contact & Feedback
|
||||
|
||||
<details>
|
||||
<summary>Click to expand contact & feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
</details>
|
||||
62
en/docs/dev_doc/evb/wifi_8711_speaker/web_config_guide.md
Normal file
62
en/docs/dev_doc/evb/wifi_8711_speaker/web_config_guide.md
Normal file
@@ -0,0 +1,62 @@
|
||||
---
|
||||
title: WiFi-Audio-TRX-V1 Web Configuration Guide
|
||||
description: WiFi-Audio-TRX-V1 speaker evaluation board TX/RX Web configuration tutorial
|
||||
keywords: Wi-Fi speakers, WB8711_ZW, RTL8711, WiFi-Audio-TRX-V1, Web configuration, network configuration, evaluation board
|
||||
hide:
|
||||
- toc
|
||||
---
|
||||
|
||||
|
||||
# WiFi-Audio-TRX-V1 Web Configuration Guide
|
||||
|
||||
Web configuration and device management operations for WiFi-Audio-TRX-V1 wireless speaker firmware and evaluation board, helping you quickly complete TX and RX scanning, pairing and parameter configuration.
|
||||
|
||||
## Preparation
|
||||
- After TX is powered on, it enters network configuration mode by default according to firmware configuration; to enter Web configuration, press and hold the TX LED button (for details, please refer to [TX Transmitter Board Hardware Adjustment](user_guide.md###tx-发送板的硬件调整). If no debug switch, use jumper wire to short `pin28` to `GND`, keep for more than 2 seconds).
|
||||
- Power on RX and standby, ensure it is not paired with other TX.
|
||||
- Search and connect to the Wi-Fi broadcasted by TX (example: `FTYWiFiSpeaker_7BA3`), default password is `12345678`, cannot be changed.
|
||||
- After successful connection, the browser will automatically pop up and enter the Web configuration page. It is recommended to copy the IP in the page and open it in another browser window for better stability.
|
||||
- Device recommendations: Android phones, Windows computers, macOS. Apple phones are not recommended.
|
||||
|
||||
|
||||
|
||||
## Enable Web Configuration Mode (TX)
|
||||
1. After TX is powered on, press and hold the LED button (or short `pin28` to `GND` for more than 2 seconds) to enter Web configuration mode.
|
||||
2. After the Web page loads, it enters network scanning mode by default; the [Start Scanning] button on the page is red, and the TX LED flashes rapidly indicating scanning is in progress.
|
||||
|
||||
|
||||
|
||||
## Connect RX and Scan
|
||||
1. After RX is powered on, it will automatically connect to TX and display the connection status on the Web page.
|
||||
2. To stop scanning, click the red [Start Scanning] button, the button turns green indicating scanning is stopped.
|
||||
3. Newly connected RX will be displayed in the [Scanned Devices] area with status "Connected - Not Paired".
|
||||
4. To add new RX, repeatedly turn on/off the [Start Scanning] button (red for on, green for off).
|
||||
|
||||
## Configure RX Parameters
|
||||
1. In the [Network Control] area in the middle, select the current TX channel configuration through [Device-Type]. This option does not save memory and needs to be reselected after leaving the page.
|
||||
2. In the [Device Management] area below, you can view the connection status of each RX and perform the following operations:
|
||||
- Select channel: [Channel]
|
||||
- Modify name: [Device Name]
|
||||
- Execute pairing: [Pair]
|
||||
- Test sound: [Test]
|
||||
3. RX that has completed pairing will be locked to the current TX and cannot pair with other TX; unpaired RX can reconnect with other TX after power off.
|
||||
|
||||
## Complete Configuration and Playback
|
||||
1. After confirming all RX parameters and pairing, click [Paired Complete] to complete Web configuration.
|
||||
2. TX will automatically restart and exit Web configuration mode. At this time, the network configuration Wi-Fi signal will no longer appear.
|
||||
3. After RX reconnects, TX only connects to paired RX and can start normal playback.
|
||||
|
||||
## Common Issues and Troubleshooting
|
||||
- RX not displayed on the page after power on: Please confirm RX is not paired with other TX; reset RX and re-enable scanning on TX page.
|
||||
- Unable to play computer sound in Web configuration mode: This is normal. Configuration mode only supports test tones. Please click [Paired Complete] to end configuration before testing playback.
|
||||
- Page cannot refresh properly after phone connects to Wi-Fi: The Wi-Fi broadcasted by TX is a non-router authenticated network. Some phones/computers will determine it as "network requiring verification". After connection, please access by IP using a browser for better stability.
|
||||
- TX page cannot refresh or connection disconnected: Please power cycle TX and press and hold to enter Web configuration mode; reconnect to network configuration Wi-Fi and access by IP.
|
||||
|
||||
## Contact & Feedback
|
||||
|
||||
<details>
|
||||
<summary>Click to expand contact & feedback form</summary>
|
||||
|
||||
--8<-- "common/customer_form.md"
|
||||
|
||||
</details>
|
||||
Reference in New Issue
Block a user