update
有下载内容的页面顶部配置加入login:true
This commit is contained in:
PhatenIoT-yan
@@ -1,24 +0,0 @@
|
||||
### PC扬声器声道设置说明
|
||||
前提，如果使用我们提供的 demo 板，和音频解码模组。如果您没有自己的驱动。需要先安装对应的驱动程序
|
||||
[下载地址](/assets/download/a316-8711-5.1make/a316demo驱动.zip)
|
||||
#### 1）当接好线之后，把其它 rx 端接入音响设备，把 tx 端的 demo 板接入电脑或手机
|
||||
|
||||
正常来说通电时，tx端会和 rx 端自动配对
|
||||
|
||||
是电脑的话，可能需要有所配置 打开运行（Win+R），输入【control】命令，按【确定或回车】，在控制面板中选择【声音】点击进入
|
||||
|
||||
|
||||
|
||||
#### 2）配置输出采样率与位深度
|
||||
在【声音】设置中 选择【播放】下的扬声器，鼠标右击，点击【属性】 再选择高级
|
||||
|
||||
|
||||
#### 3）配置扬声器
|
||||
同样在鼠标右击扬声器，点击【配置扬声器】
|
||||
|
||||
|
||||
#### 4）选择需要的声道, 请根据实际需要的音响环境选择
|
||||
|
||||
|
||||
#### 5）所有线材电源连接成功后，可将RTL8711DCM PCB 上的复位键，全部按一次
|
||||
|
||||
@@ -1,25 +1,93 @@
|
||||
### PC Speaker Channel Setup Instructions
|
||||
Prerequisite: If you are using our demo board and audio decoding module, and you don't have your own driver, you need to install the corresponding driver first.
|
||||
[Download Link](/assets/download/a316-8711-5.1make/a316demo驱动.zip)
|
||||
---
|
||||
title: Multi-Channel Audio Device User Guide
|
||||
login: true
|
||||
---
|
||||
|
||||
#### 1) After connecting the cables, connect other rx ends to audio equipment, and connect the tx end demo board to computer or phone
|
||||
# Multi-Channel Audio Device User Guide
|
||||
|
||||
Normally, when powered on, the tx end will automatically pair with the rx end
|
||||
## Windows System Configuration Guide
|
||||
|
||||
For computers, some configuration may be needed. Open Run (Win+R), enter the [control] command, press [OK or Enter], select [Sound] in Control Panel and click to enter
|
||||
### Windows 10 System Configuration
|
||||
1. Driver Installation
|
||||
- If using our demo board and audio decoding module without your own driver, you need to install the corresponding driver first
|
||||
- [Download Link](/assets/download/a316-8711-5.1make/a316demo驱动.zip)
|
||||
|
||||
|
||||
2. Access Sound Settings
|
||||
- Open Run (Win+R)
|
||||
- Enter the "control" command
|
||||
- Press "OK or Enter"
|
||||
- Select "Sound" in Control Panel and click to enter
|
||||
|
||||
#### 2) Configure Output Sample Rate and Bit Depth
|
||||
In [Sound] settings, select the speaker under [Playback], right-click and click [Properties], then select Advanced
|
||||
|
||||
|
||||
|
||||
#### 3) Configure Speakers
|
||||
Similarly, right-click the speaker and click [Configure Speakers]
|
||||
|
||||
3. Configure Output Sample Rate and Bit Depth
|
||||
- In "Sound" settings, select the speaker under "Playback"
|
||||
- Right-click and click "Properties"
|
||||
- Select Advanced
|
||||
|
||||
#### 4) Select the required channels, please choose according to your actual audio environment needs
|
||||
|
||||
|
||||
|
||||
#### 5) After all cables and power connections are successful, press all reset buttons on the RTL8711DCM PCB once
|
||||
|
||||
4. Configure Speakers
|
||||
- Right-click on the speaker
|
||||
- Click "Configure Speakers"
|
||||
|
||||
|
||||
|
||||
5. Select Channel Configuration
|
||||
- Choose according to your actual audio environment needs
|
||||
- After successful configuration, you can restart the device
|
||||
|
||||
|
||||
|
||||
### Windows 11 System Configuration
|
||||
1. Device Connection
|
||||
- Connect the 7.1 channel USB audio device to a computer running Windows 11
|
||||
- (For spatial audio evaluation boards, if using Windows 7/Windows 8 systems, you need to install the XMOS evaluation board driver)
|
||||
|
||||
2. Access Sound Settings
|
||||
- Click the speaker icon in the lower left of the icon marked as 1 in the taskbar
|
||||
- Select "Sound Settings" to the right of the mark labeled 2 in the popup menu
|
||||
- Select "More Sound Settings" to the right of the icon marked as 3 in the popup dialog
|
||||
|
||||
|
||||
|
||||
## macOS System Configuration Guide
|
||||
|
||||
### System Requirements
|
||||
- Images in this document are from macOS 15.5 version
|
||||
- Requires USB device supporting 7.1 spatial audio
|
||||
|
||||
### Configuration Steps
|
||||
1. Device Connection
|
||||
- Connect the USB device supporting 7.1 spatial audio to your macOS computer
|
||||
|
||||
2. Configure Audio Device
|
||||
1. Open Audio Settings
|
||||
- Open the "Audio MIDI Setup" application from Launchpad
|
||||
|
||||
|
||||
|
||||
2. Set Default Playback Device
|
||||
- Select the corresponding USB device (marked as 1 in the image)
|
||||
- Open the configuration menu (can be operated with mouse or click the settings icon marked as 2 below)
|
||||
- Click the menu with speaker icon on the left, select [Use this device for sound output]
|
||||
|
||||
|
||||
|
||||
3. Configure Channel Mapping
|
||||
- Click the [Configure Speakers] button to the right of mark 4 in the above image
|
||||
- In the popup configuration dialog:
|
||||
1. Select 7.1 Surround Sound below mark 1
|
||||
2. Modify the corresponding channels of the audio device to the right of mark 2 (default positions of the last four channels need to be modified)
|
||||
3. Click the apply icon below mark 3
|
||||
4. Click the "Confirm" icon to the right of mark 4
|
||||
|
||||
|
||||
|
||||
4. Channel Test
|
||||
- Connect headphones to the USB AUDIO device
|
||||
- Ensure spatial audio is enabled (GolsSample blue LED is on)
|
||||
- Click each SPEAKER icon to the right of mark 5 in the above image
|
||||
- Listen to the audio and confirm the sound source position
|
||||
- You can use Windows Media Player to play the test file: 8ch_surround_check_chinese.wav
|
||||
- Carefully listen to the speaker's voice direction and confirm if it matches the voice content
|
||||
Reference in New Issue
Block a user